If you too have already hear a grinding noise on Mazda CX 9, you must have asked yourself the same questions as all Mazda CX 9 owners. We are rarely reassured when a grinding noise comes out on our car. As we are conscious of your doubts and questions, we have made a decision to compose this article content in order to support you in and ease your investigation for a answer to your problem. To do this, first we will see what the sources of a grinding noise on Mazda CX 9 are when you turn the wheel, then those of a grinding noise when you brake, if you have a grinding noise on Mazda CX 9 that comes from the shock absorbers and to finish from one of your doors.grinding-noise-mazda-cx-9

I experience a grinding noise on Mazda CX 9 once I turn the wheel

First, we will check out the grinding noises on Mazda CX 9 that take place when ever you turn the wheel of your car. Here are the main explanations for this:

  • Hydraulic system
  • If you are subject to grinding noises on your Mazda CX 9 once you turn the wheels, it may be relating to the hydraulic system of your car that allows you to run the entire power steering part. In this instance, the main point to check is the power steering fluid level, which if below the normal level could be a signal of a leak of the device. In this case, keep in mind to redo the level and check it frequently. If the problem continues, go to your technician.

  • Bearings
  • “A grinding noise on Mazda CX 9 once I turn the wheels of my car” can also result from premature wear of your bearings. Indeed, bearings play an essential role in the good behaviour of the car when driving. When you turn at low speed and bring the steering to a stop, the pressure on the bearings is higher than at high speed, it can make sounds close to a grinding if they are worn. Please remember to check their state.

  • Steering pump
  • Finally, a grinding noise on Mazda CX 9 once I turn may be related to a tired steering pump power steering pump. The task of this organ is to function the steering belt, which will allow you to take advantage of the power steering. If the pump is tired, its operation will be impaired and squeaks may show up between it and the belt. Take into account to check that it is working properly.

    If despite these different solutions you continue to hear a grinding noise on Mazda CX 9 when turning your steering wheel, we have produced a complete article content on this subject that can support you locate the origin.

    I listen to a grinding noise on Mazda CX 9 once braking

    If you experience a grinding noise from the brakes of your Mazda CX 9, it is highly imaginable that it will be caused by brake pads at the end of their life, indeed, the function of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average range in kilometres for pads, but based on your driving style and route, this may vary. Take out the wheels in question and check the wear indicator on them. If they are dead they will have to be changed quickly because they will quickly damage your discs.
    If, despite check, your grinding noise on Mazda CX 9 does come from your brakes but is not relating to the pads, check this content to find out the other possible origins of brake noises on Mazda CX 9.

    I experience a grinding noise on Mazda CX 9 at the shock absorbers

    If you are in the situation where you discover the grinding noise on Mazda CX 9 as coming from the damping part of your car, whether you are driving over a retarder, on a bumpy road, or simply once you change direction and the vehicle’s mass is swung from one side to the other. In cases like this, there are several explanations that can justify this noise. Indeed, you will have to check some points, here they are:

    • You have an oil leak at a shock absorber, it is up to you to check that there is no oil leaking from your shock absorbers.
    • You may experience abnormal wear and tear on one of the seals. This would trigger an oil leak
    • Finally you can have one of your shock absorber cylinders deformed, which will make a grinding noise on Mazda CX 9

    at each compression.
    Once you have tested all these elements, you should have found the source of your trouble, go to your auto technician to fix the malfunctioning part. If you have not identified the source of your problem, we advise that you look at this content which discusses all possible origins of shock absorber noise on Mazda CX 9.

    I experience a grinding noise on Mazda CX 9 at a door

    If that’s not enough, don’t hesitate to take a look at this complete content on door sounds on Mazda CX 9.
    It is possible, determined by the type of noise you know, that the hinge of your door is at the source of these noises. If this is the case, you will have to examine it by opening your door and checking that the grinding noise on your Mazda CX 9 comes from a hinge that is too dry. To solve this problem, first try to grease the hinge, in most cases this is enough to solve your problem. If that’s not enough, don’t hesitate to have a look at this complete content on door sounds on Mazda CX 9.