If you too have already feel a grinding noise on Ford Edge, you must have asked yourself the same questions as all Ford Edge owners. We are rarely reassured when a grinding noise occurs on our automobile. As we are conscious of your uncertainties and questions, we have decided to prepare this content page to be able to assist you in and facilitate your investigation for a remedy to your trouble. To do this, first we will see what the origins of a grinding noise on Ford Edge are when you turn the wheel, then those of a grinding noise when you brake, if you have a grinding noise on Ford Edge that originates from the shock absorbers and to finish from one of your doors.grinding-noise-ford-edge

I hear a grinding noise on Ford Edge when I turn the wheel

First, we will take a look at the grinding noises on Ford Edge that appear when you turn the wheel of your automobile. Here are the main reasons for this:

  • Hydraulic system
  • If you are subject to grinding noises on your Ford Edge when you turn the wheels, it may be related to the hydraulic system of your automobile that allows you to operate the entire power steering part. In such a case, the main point to verify is the power steering fluid level, which if below the normal level could be a signal of a leak of the system. In this case, bear in mind to redo the level and verify it regularly. If the trouble continues, go to your motor mechanic.

  • Bearings
  • “A grinding noise on Ford Edge when I turn the wheels of my automobile” can also originate from premature wear of your bearings. In fact, bearings play an essential role in the good behaviour of the automobile when driving. When you turn at low speed and bring the steering to a stop, the pressure on the bearings is higher than at high speed, it can make sounds close to a grinding if they are worn. Please remember to verify their state.

  • Steering pump
  • Finally, a grinding noise on Ford Edge when I turn may be linked to a tired steering pump power steering pump. The mission of this organ is to run the steering belt, which will allow you to take advantage of the power steering. If the pump is tired, its operation will be impaired and squeaks may surface between it and the belt. Bear in mind to verify that it is working properly.

    If despite these different possibilities you continue to hear a grinding noise on Ford Edge when turning your steering wheel, we have made a complete article on this subject that can support you find the origin.

    I hear a grinding noise on Ford Edge when braking

    If you hear a grinding noise from the brakes of your Ford Edge, it is highly conceivable that it will be caused by brake pads at the end of their life, actually, the function of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average range in kilometres for pads, but according to your driving style and route, this may vary. Remove the wheels in question and verify the wear indicator on them. If they are dead they will have to be changed promptly because they will promptly damage your discs.
    If, despite crontrol, your grinding noise on Ford Edge does come from your brakes but is not related to the pads, verify this article content to find out the other plausible origins of brake noises on Ford Edge.

    I hear a grinding noise on Ford Edge at the shock absorbers

    If you are in the scenario where you discern the grinding noise on Ford Edge as coming from the damping part of your automobile, whether you are driving over a retarder, on a bumpy road, or simply when you change direction and the vehicle’s mass is swung from one side to the other. In such a case, there are several reasons that can explain this noise. In fact, you will have to verify some points, here they are:

    • You have an oil leak at a shock absorber, it is up to you to verify that there is no oil leaking from your shock absorbers.
    • You may encounter abnormal wear and tear on one of the seals. This would trigger an oil leak
    • Finally you can have one of your shock absorber cylinders deformed, which will create a grinding noise on Ford Edge

    at each compression.
    Once you have tested all these areas, you should have found the origin of your problem, go to your mechanic to fix the faulty part. If you have not identified the origin of your trouble, we recommend that you take a look at this article content which discusses all possible origins of shock absorber noise on Ford Edge.

    I hear a grinding noise on Ford Edge at a door

    If that’s not enough, don’t hesitate to look at this complete article content on door sounds on Ford Edge.
    It is plausible, according to the type of noise you know, that the hinge of your door is at the source of these noises. If this is the case, you will have to check it by opening your door and examining that the grinding noise on your Ford Edge comes from a hinge that is too dry. To resolve this trouble, first try to grease the hinge, in most cases this is enough to solve your trouble. If that’s not enough, don’t hesitate to check out this complete article content on door sounds on Ford Edge.