If you too have already discover a grinding noise on Fiat Punto, you must have wondering the same questions as all Fiat Punto owners. We are rarely reassured when a grinding noise arises on our car. As we are conscious of your doubts and questions, we have made a decision to create this content in order to support you in and ease your investigation for a remedy to your problem. To do this, first we will see what the origins of a grinding noise on Fiat Punto are when you turn the wheel, then those of a grinding noise when you brake, if you have a grinding noise on Fiat Punto that comes from the shock absorbers and to finish from one of your doors.grinding-noise-fiat-punto

I perceive a grinding noise on Fiat Punto when I turn the wheel

First, we will have a look at the grinding noises on Fiat Punto that occur every time you turn the wheel of your car. Here are the main causes for this:

  • Hydraulic system

    • If you are subject to grinding noises on your Fiat Punto when you turn the wheels, it may be linked to the hydraulic system of your car that allows you to operate the entire power steering part. In such a case, the main point to check is the power steering fluid level, which if below the normal level could be an indicator of a leak of the system. In this case, please remember to redo the level and check it regularly. If the problem persists, go to your motor mechanic.

  • Bearings

    • “A grinding noise on Fiat Punto when I turn the wheels of my car” can also be a consequence of premature wear of your bearings. Indeed, bearings play an essential role in the good behaviour of the car when driving. When you turn at low speed and bring the steering to a stop, the pressure on the bearings is higher than at high speed, it can generate sounds close to a grinding if they are worn. Keep in mind to check their condition.

  • Steering pump

    • Finally, a grinding noise on Fiat Punto when I turn may be connected to a tired steering pump power steering pump. The goal of this organ is to operate the steering belt, which will allow you to take advantage of the power steering. If the pump is tired, its operation will be impaired and squeaks may appear between it and the belt. Please remember to check that it is working properly.

    If despite these different solutions you continue to notice a grinding noise on Fiat Punto when turning your steering wheel, we have created a complete content page on this subject that can support you find the origin.

    I hear a grinding noise on Fiat Punto when braking

    If you perceive a grinding noise from the brakes of your Fiat Punto, it is highly conceivable that it will be caused by brake pads at the end of their life, actually, the task of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average range in kilometres for pads, but according to your driving style and route, this may vary. Remove the wheels in question and check the wear indicator on them. If they are dead they will have to be substituted almost instantly because they will almost instantly damage your discs.
    If, despite verification, your grinding noise on Fiat Punto does come from your brakes but is not linked to the pads, check this content to find out the other conceivable sources of brake noises on Fiat Punto.

    I perceive a grinding noise on Fiat Punto at the shock absorbers

    If you are in the scenario where you find the grinding noise on Fiat Punto as coming from the damping part of your car, whether you are driving over a retarder, on a bumpy road, or simply when you change direction and the vehicle’s mass is swung from one side to the other. In this case, there are several causes that can justify this noise. Indeed, you will have to check some points, here they are:

    • You have an oil leak at a shock absorber, it is up to you to check that there is no oil leaking from your shock absorbers.
    • You may experience abnormal wear and tear on one of the seals. This would end in an oil leak
    • Finally you can have one of your shock absorber cylinders deformed, which will create a grinding noise on Fiat Punto

    at each compression.
    Once you have checked all these elements, you should have found the origin of your issue, go to your auto technician to fix the malfunctioning part. If you have not identified the origin of your problem, we recommend highly that you take a look at this content which discusses all possible origins of shock absorber noise on Fiat Punto.

    I perceive a grinding noise on Fiat Punto at a door

    If that’s not enough, don’t hesitate to look at this complete content on door sounds on Fiat Punto.
    It is conceivable, based on the type of noise you acknowledge, that the hinge of your door is at the origin of these noises. If this is the case, you will have to examine it by opening your door and checking that the grinding noise on your Fiat Punto comes from a hinge that is too dry. To solve this problem, first try to grease the hinge, in most cases this is enough to solve your problem. If that’s not enough, don’t hesitate to check out this complete content on door sounds on Fiat Punto.