If you too have already discover a grinding noise on Bmw Serie 2, you must have wondering the same questions as all Bmw Serie 2 owners. We are rarely reassured when a grinding noise arises on our automobile. As we are conscious of your fears and questions, we have made a decision to compose this article content to be able to support you in and facilitate your quest for a answer to your problem. To do this, first we will see what the origins of a grinding noise on Bmw Serie 2 are when you turn the wheel, then those of a grinding noise when you brake, if you have a grinding noise on Bmw Serie 2 that comes from the shock absorbers and to finish from one of your doors.grinding-noise-bmw-serie-2

I hear a grinding noise on Bmw Serie 2 when ever I turn the wheel

First, we will look at the grinding noises on Bmw Serie 2 that appear when ever you turn the wheel of your automobile. Here are the main explanations for this:

  • Hydraulic system
  • If you notice grinding noises on your Bmw Serie 2 when ever you turn the wheels, it may be relating to the hydraulic system of your automobile that allows you to run the entire power steering part. In such a case, the main point to check is the power steering fluid level, which if below the normal level could be a sign of a leak of the device. In this case, bear in mind to redo the level and check it frequently. If the problem is persistant, go to your motor mechanic.

  • Bearings
  • “A grinding noise on Bmw Serie 2 when ever I turn the wheels of my automobile” can also be a consequence of premature wear of your bearings. Indeed, bearings play an essential role in the good behaviour of the automobile when driving. When you turn at low speed and bring the steering to a stop, the pressure on the bearings is higher than at high speed, it can produce sounds close to a grinding if they are worn. Think about to check their condition.

  • Steering pump
  • Finally, a grinding noise on Bmw Serie 2 when ever I turn may be linked to a tired steering pump power steering pump. The task of this organ is to function the steering belt, which will allow you to take advantage of the power steering. If the pump is tired, its operation will be impaired and squeaks may show up between it and the belt. Consider to check that it is working properly.

    If despite these different possibilities you continue to notice a grinding noise on Bmw Serie 2 when turning your steering wheel, we have created a complete content page on this subject that can support you locate the origin.

    I experience a grinding noise on Bmw Serie 2 when ever braking

    If you hear a grinding noise from the brakes of your Bmw Serie 2, it is highly conceivable that it will be linked to brake pads at the end of their life, in fact, the purpose of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average range in kilometres for pads, but based on your driving style and route, this may vary. Take out the wheels in question and check the wear indicator on them. If they are dead they will have to be replaced almost instantly because they will almost instantly damage your discs.
    If, despite check, your grinding noise on Bmw Serie 2 does come from your brakes but is not relating to the pads, check this article content to find out the other conceivable sources of brake noises on Bmw Serie 2.

    I hear a grinding noise on Bmw Serie 2 at the shock absorbers

    If you are in the scenario where you discover the grinding noise on Bmw Serie 2 as coming from the damping part of your automobile, whether you are driving over a retarder, on a bumpy road, or simply when ever you change direction and the vehicle’s mass is swung from one side to the other. In cases like this, there are several explanations that can explain this noise. Indeed, you will have to check some points, here they are:

    • You have an oil leak at a shock absorber, it is up to you to check that there is no oil leaking from your shock absorbers.
    • You may experience abnormal wear and tear on one of the seals. This would result in an oil leak
    • Finally you can have one of your shock absorber cylinders deformed, which will create a grinding noise on Bmw Serie 2

    at each compression.
    Once you have checked all these points, you should have found the source of your issue, go to your auto mechanic to fix the defective part. If you have not found the source of your problem, we recommend highly that you have a look at this article content which discusses all possible origins of shock absorber noise on Bmw Serie 2.

    I hear a grinding noise on Bmw Serie 2 at a door

    If that’s not enough, don’t hesitate to check out this complete article content on door sounds on Bmw Serie 2.
    It is conceivable, according to the kind of of noise you know, that the hinge of your door is at the origin of these noises. If this is the case, you will have to verify it by opening your door and checking out that the grinding noise on your Bmw Serie 2 comes from a hinge that is too dry. To fix this problem, first try to grease the hinge, in most cases this is enough to solve your problem. If that’s not enough, don’t hesitate to check out this complete article content on door sounds on Bmw Serie 2.