On occasion your car can make noises in the front axle, you are very almost never reassured by this sort of noise and you immediately tend to presume that you will lose a wheel or that the fix will cost you an huge amount. Then, what if you discern a noise coming from a gimbals of your Volkswagen Rabbit? It may not be much and you can fix the problem yourself, but if in doubt it is better to examine before a larger failure takes place. It is with this in mind that we have decided to make this document and allow you to locate the problem and find a treatment. We will, through several steps review all the components that can make noises at the front end of your Volkswagen Rabbit. 
What are the elements that can cause a noise close to gimbals on Volkswagen Rabbit?
Most of our work will focus on finding the element that gives your Volkswagen Rabbit gimbals noise. The following is a list of the components that are most likely to be causing it and how to confirm it.
Noise vibration that sounds like gimbals on Volkswagen Rabbit : the shock absorber cup
One of the most likely causes of noises on Volkswagen Rabbit that sounds like a gimbals is advanced wear and tear on your suspension system. In fact, the suspension cups, when they are dead, the rubber (silentblock) that acts as a buffer and shock absorber for the upper part of the suspension no longer fulfils its role and during small jolts that compress the suspensions. To examine if this is the problem that concerns you, take a dented, slow-speed road and pay attention to the noise coming from your front end as you pass over holes. If these are the cups, think about changing them as soon as possible as this may affect other parts and require more costly repairs.
Noise while turning that sounds like gimbals Volkswagen Rabbit : stabilizer bar
If you detect of a noise on your Volkswagen Rabbit that sounds like a gimbals when you are turning flat or climbing on sidewalks for example, it is most likely linked to one of the parts of your stabilizer bar that is faulty. To confirm the origin of the problem, you may feel a lack of stability in the direction of the automobile (it pulls to the left or it pulls to the right). Also, you can position yourself on one side of one of your front wheels then the other and try to shake your wheels vigorously, if you hear a clicking sound it is highly possible that your silentblocks of stabilizer bar are dead. In this case, go to your garage.
Noise when turning Volkswagen Rabbit : gimbals
One of the most common causes when noise appearsand sounds like gimbals on your Volkswagen Rabbit when you turn with your automobile is connected to the direction of your automobile. In fact, the gimbals and their bellows are parts that are constantly stressed during your changes of direction and a wear of one of them can make “Clac clac” type noises when you approach the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on your Volkswagen Rabbit, do not hesitate to consult this article to find the solution to your problem.
