Occasionally your automobile can make noises in the front axle, you are very rarely reassured by this kind of noise and you straightaway tend to presume that you will lose a wheel or that the repair will cost you an astronomical sum. Then, what if you recognize a noise coming from a gimbals of your Volkswagen Polo 6? It may not be much and you can fix the issue yourself, but if in doubt it is better to verify before a larger damage occurs. It is with this in mind that we have chosen to write this article and allow you to find the issue and find a solution. We will, through few steps review all the elements that can produce noises at the front end of your Volkswagen Polo 6. 
What are the elements that can cause a noise close to gimbals on Volkswagen Polo 6?
Most of our work will focus on finding the element that gives your Volkswagen Polo 6 gimbals noise. The following is a list of the components that are most likely to be creating it and how to confirm it.
Noise vibration that sounds like gimbals on Volkswagen Polo 6 : the shock absorber cup
One of the most likely causes of noises on Volkswagen Polo 6 that sounds like a gimbals is advanced wear and tear on your shock system. In fact, the suspension cups, when they are out of date, the rubber (silentblock) that acts as a buffer and shock absorber for the upper part of the suspension no longer fulfils its role and during small jolts that compress the suspensions. To verify if this is the issue that concerns you, take a dented, slow-speed road and focus on the noise coming from your front end as you pass over holes. If these are the cups, consider changing them soon as this may damage other parts and require more costly repairs.
Noise while turning that sounds like gimbals Volkswagen Polo 6 : stabilizer bar
If you detect of a noise on your Volkswagen Polo 6 that sounds like a gimbals when you are turning flat or climbing on sidewalks for example, it is most likely related to one of the parts of your stabilizer bar that is malfunctioning. To confirm the origin of the issue, you may feel a lack of stability in the direction of the automobile (it pulls to the left or it pulls to the right). In addition, you can position yourself on one side of one of your front wheels then the other and try to shake your wheels strongly, if you hear a clicking sound it is highly possible that your silentblocks of stabilizer bar are out of date. In this case, go to your garage.
Noise when turning Volkswagen Polo 6 : gimbals
One of the most traditional causes when noise shows upand sounds like gimbals on your Volkswagen Polo 6 when you turn with your automobile is linked to the direction of your automobile. Indeed, the gimbals and their bellows are parts that are continuously stressed during your changes of direction and a wear of one of them can generate “Clac clac” type noises when you reach the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on your Volkswagen Polo 6, do not hesitate to consult this article to find the solution to your problem.
