Occasionally your automobile can make noises in the front axle, you are very rarely reassured by this types of noise and you instantly tend to presume that you will lose a wheel or that the repair will cost you an astronomical amount. Thus, what if you identify a noise coming from a gimbals of your Volkswagen Polo 4? It may not be much and you can correct the problem yourself, but if in doubt it is better to check before a larger troubles appears. It is with this in mind that we have chosen to make this content and allow you to locate the problem and find a solution. We will, through several steps review all the elements that can produce noises at the front end of your Volkswagen Polo 4. 
What are the elements that can cause a noise close to gimbals on Volkswagen Polo 4?
Most of our work will focus on finding the element that gives your Volkswagen Polo 4 gimbals noise. The following is a list of the components that are most likely to be generating it and how to verify it.
Noise vibration that sounds like gimbals on Volkswagen Polo 4 : the shock absorber cup
One of the most likely reason of noises on Volkswagen Polo 4 that sounds like a gimbals is advanced wear and tear on your shock system. Indeed, the suspension cups, when they are out of date, the rubber (silentblock) that acts as a buffer and shock absorber for the upper part of the suspension no longer does its role and during small jolts that compress the suspensions. To check if this is the problem that concerns you, take a dented, slow-speed road and focus on the noise coming from your front end as you pass over holes. If these are the cups, consider changing them promptly as this may affect other components and require more expensive repairs.
Noise while turning that sounds like gimbals Volkswagen Polo 4 : stabilizer bar
If you recognise of a noise on your Volkswagen Polo 4 that sounds like a gimbals when you are turning flat or climbing on sidewalks for example, it is most likely connected to one of the parts of your stabilizer bar that is malfunctioning. To verify the origin of the problem, you may feel a lack of balance in the direction of the car (it pulls to the left or it pulls to the right). In addition, you can position yourself on one side of one of your front wheels then the other and try to shake your wheels strongly, if you hear a clicking sound it is highly imaginable that your silentblocks of stabilizer bar are out of date. In this case, go to your garage.
Noise when turning Volkswagen Polo 4 : gimbals
One of the most common causes when noise appearsand sounds like gimbals on your Volkswagen Polo 4 when you turn with your car is in connection with the direction of your car. Certainly, the gimbals and their bellows are parts that are continuously stressed during your changes of direction and a wear of one of them can generate “Clac clac” type noises when you approach the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on your Volkswagen Polo 4, do not hesitate to consult this article to find the solution to your problem.
