Sometimes your vehicle can make noises in the front axle, you are very almost never reassured by this types of noise and you immediately tend to think that you will lose a wheel or that the fix will cost you an astronomical amount. So, what if you identify a noise coming from a gimbals of your Volkswagen Polo? It may not be much and you can fix the issue yourself, but if in doubt it is better to verify before a larger problem happens. It is with this in mind that we have chosen to produce this document and allow you to find the issue and find a treatment. We will, through different steps review all the elements that can make noises at the front end of your Volkswagen Polo. 
What are the elements that can cause a noise close to gimbals on Volkswagen Polo?
Most of our job will focus on finding the element that gives your Volkswagen Polo gimbals noise. The following is a list of the components that are most likely to be making it and how to validate it.
Noise vibration that sounds like gimbals on Volkswagen Polo : the shock absorber cup
One of the most likely reason of noises on Volkswagen Polo that sounds like a gimbals is advanced wear and tear on your suspension system. In fact, the suspension cups, when they are out of date, the rubber (silentblock) that acts as a buffer and shock absorber for the upper part of the suspension no longer assumes its role and during small jolts that compress the suspensions. To verify if this is the issue that worries you, take a dented, slow-speed road and focus on the noise coming from your front end as you pass over holes. If these are the cups, consider swapping them soon as this may affect other parts and require more pricey repairs.
Noise while turning that sounds like gimbals Volkswagen Polo : stabilizer bar
If you know of a noise on your Volkswagen Polo that sounds like a gimbals when you are turning flat or going up on sidewalks for example, it is most likely related to one of the parts of your stabilizer bar that is malfunctioning. To validate the origin of the issue, you may feel a lack of stability in the direction of the vehicle (it pulls to the left or it pulls to the right). Additionally, you can position yourself on one side of one of your front wheels then the other and try to shake your wheels powerfully, if you hear a clicking sound it is highly possible that your silentblocks of stabilizer bar are out of date. In this case, go to your garage.
Noise when turning Volkswagen Polo : gimbals
One of the most common causes when noise happensand sounds like gimbals on your Volkswagen Polo when you turn with your vehicle is in connection with the direction of your vehicle. Indeed, the gimbals and their bellows are parts that are constantly stressed during your changes of direction and a wear of one of them can create “Clac clac” type noises when you approach the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on your Volkswagen Polo, do not hesitate to consult this article to find the solution to your problem.
