On occasion your car can make noises in the front axle, you are very hardly ever reassured by this sorts of noise and you straightaway tend to think that you will lose a wheel or that the repair will cost you an astronomical amount. Then, what if you detect a noise coming from a gimbals of your Toyota Rav 4? It may not be much and you can resolve the problem yourself, but if in doubt it is better to check before a larger problem appears. It is with this in mind that we have decided to make this document and allow you to locate the problem and find a solution. We will, through several steps review all the elements that can produce noises at the front end of your Toyota Rav 4. 
What are the elements that can cause a noise close to gimbals on Toyota Rav 4?
Most of our job will focus on finding the element that gives your Toyota Rav 4 gimbals noise. The following is a list of the components that are most likely to be producing it and how to confirm it.
Noise vibration that sounds like gimbals on Toyota Rav 4 : the shock absorber cup
One of the most likely causes of noises on Toyota Rav 4 that sounds like a gimbals is advanced wear and tear on your shock system. In fact, the suspension cups, when they are dead, the rubber (silentblock) that acts as a buffer and shock absorber for the upper part of the suspension no longer fulfils its role and during small jolts that compress the suspensions. To check if this is the problem that concerns you, take a dented, slow-speed road and listen to the noise coming from your front end as you pass over holes. If these are the cups, think about swapping them soon as this may damage other components and require more pricey repairs.
Noise while turning that sounds like gimbals Toyota Rav 4 : stabilizer bar
If you find out of a noise on your Toyota Rav 4 that sounds like a gimbals when you are turning flat or climbing on sidewalks for example, it is most likely linked to one of the parts of your stabilizer bar that is faulty. To confirm the origin of the problem, you may feel a lack of stability in the direction of the car (it pulls to the left or it pulls to the right). Additionally, you can position yourself on one side of one of your front wheels then the other and try to shake your wheels vigorously, if you hear a clicking sound it is highly imaginable that your silentblocks of stabilizer bar are dead. In this case, go to your garage.
Noise when turning Toyota Rav 4 : gimbals
One of the most traditional causes when noise appearsand sounds like gimbals on your Toyota Rav 4 when you turn with your car is related to the direction of your car. In fact, the gimbals and their bellows are parts that are constantly stressed during your changes of direction and a wear of one of them can create “Clac clac” type noises when you approach the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on your Toyota Rav 4, do not hesitate to consult this article to find the solution to your problem.
