Occasionally your car can make noises in the front axle, you are very hardly ever reassured by this types of noise and you directly tend to think that you will lose a wheel or that the repair will cost you an massive sum. Then, what if you detect a noise coming from a gimbals of your Toyota Prius 2? It may not be much and you can correct the problem yourself, but if in doubt it is better to examine before a larger problem shows up. It is with this in mind that we have chosen to produce this article and allow you to discover the problem and find a solution. We will, through different steps review all the elements that can generate noises at the front end of your Toyota Prius 2. 
What are the elements that can cause a noise close to gimbals on Toyota Prius 2?
Most of our job will focus on finding the element that gives your Toyota Prius 2 gimbals noise. The following is a list of the components that are most likely to be generating it and how to verify it.
Noise vibration that sounds like gimbals on Toyota Prius 2 : the shock absorber cup
One of the most common reason of noises on Toyota Prius 2 that sounds like a gimbals is advanced wear and tear on your suspension system. In fact, the suspension cups, when they are dead, the rubber (silentblock) that acts as a buffer and shock absorber for the upper part of the suspension no longer assumes its role and during small jolts that compress the suspensions. To examine if this is the problem that concerns you, take a dented, slow-speed road and listen to the noise coming from your front end as you pass over holes. If these are the cups, think about replacing them soon as this may affect other parts and require more pricey repairs.
Noise while turning that sounds like gimbals Toyota Prius 2 : stabilizer bar
If you detect of a noise on your Toyota Prius 2 that sounds like a gimbals when you are turning flat or climbing on sidewalks for example, it is most likely related to one of the parts of your stabilizer bar that is defective. To verify the origin of the problem, you may feel a lack of stability in the direction of the vehicle (it pulls to the left or it pulls to the right). Also, you can position yourself on one side of one of your front wheels then the other and try to shake your wheels powerfully, if you hear a clicking sound it is highly possible that your silentblocks of stabilizer bar are dead. In this case, go to your garage.
Noise when turning Toyota Prius 2 : gimbals
One of the most common causes when noise appearsand sounds like gimbals on your Toyota Prius 2 when you turn with your vehicle is linked to the direction of your vehicle. Certainly, the gimbals and their bellows are parts that are continuously stressed during your changes of direction and a wear of one of them can generate “Clac clac” type noises when you get closer to the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on your Toyota Prius 2, do not hesitate to consult this article to find the solution to your problem.
