Occasionally your automobile can make noises in the front axle, you are very rarely reassured by this kind of noise and you immediately tend to think that you will lose a wheel or that the repair will cost you an massive amount. Then, what if you recognize a noise coming from a gimbals of your Toyota FJ Cruiser? It may not be much and you can correct the trouble yourself, but if in doubt it is better to check before a larger problem happens. It is with this in mind that we have decided to write this content and allow you to locate the trouble and find a solution. We will, through several steps review all the components that can create noises at the front end of your Toyota FJ Cruiser. 
What are the elements that can cause a noise close to gimbals on Toyota FJ Cruiser?
Most of our article will focus on finding the element that gives your Toyota FJ Cruiser gimbals noise. The following is a list of the components that are most likely to be making it and how to confirm it.
Noise vibration that sounds like gimbals on Toyota FJ Cruiser : the shock absorber cup
One of the most classic causes of noises on Toyota FJ Cruiser that sounds like a gimbals is advanced wear and tear on your shock system. In fact, the suspension cups, when they are dead, the rubber (silentblock) that acts as a buffer and shock absorber for the upper part of the suspension no longer assumes its role and during small jolts that compress the suspensions. To check if this is the trouble that worries you, take a dented, slow-speed road and listen to the noise coming from your front end as you pass over holes. If these are the cups, consider swapping them as soon as possible as this may damage other components and require more expensive repairs.
Noise while turning that sounds like gimbals Toyota FJ Cruiser : stabilizer bar
If you know of a noise on your Toyota FJ Cruiser that sounds like a gimbals when you are turning flat or going up on sidewalks for example, it is most likely related to one of the parts of your stabilizer bar that is faulty. To confirm the origin of the trouble, you may feel a lack of stability in the direction of the car (it pulls to the left or it pulls to the right). Moreover, you can position yourself on one side of one of your front wheels then the other and try to shake your wheels powerfully, if you hear a clicking sound it is highly possible that your silentblocks of stabilizer bar are dead. In this case, go to your garage.
Noise when turning Toyota FJ Cruiser : gimbals
One of the most traditional causes when noise appearsand sounds like gimbals on your Toyota FJ Cruiser when you turn with your car is connected to the direction of your car. In fact, the gimbals and their bellows are parts that are continuously stressed during your changes of direction and a wear of one of them can make “Clac clac” type noises when you get closer to the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on your Toyota FJ Cruiser, do not hesitate to consult this article to find the solution to your problem.
