Sometimes your car can make noises in the front axle, you are very hardly ever reassured by this sort of noise and you directly tend to think that you will lose a wheel or that the repair will cost you an massive sum. So, what if you recognize a noise coming from a gimbals of your Renault Clio 2? It may not be much and you can resolve the trouble yourself, but if in doubt it is better to check before a larger problem occurs. It is with this in mind that we have decided to write this content and allow you to discover the trouble and find a solution. We will, through different steps review all the elements that can generate noises at the front end of your Renault Clio 2.
What are the elements that can cause a noise close to gimbals on Renault Clio 2?
Most of our article will focus on finding the element that gives your Renault Clio 2 gimbals noise. The following is a list of the components that are most likely to be producing it and how to verify it.
Noise vibration that sounds like gimbals on Renault Clio 2 : the shock absorber cup
One of the most common reason of noises on Renault Clio 2 that sounds like a gimbals is advanced wear and tear on your suspension system. Indeed, the suspension cups, when they are out of date, the rubber (silentblock) that acts as a buffer and shock absorber for the upper part of the suspension no longer assumes its role and during small jolts that compress the suspensions. To check if this is the trouble that concerns you, take a dented, slow-speed road and focus on the noise coming from your front end as you pass over holes. If these are the cups, consider swapping them as soon as possible as this may damage other parts and require more expensive repairs.
Noise while turning that sounds like gimbals Renault Clio 2 : stabilizer bar
If you recognise of a noise on your Renault Clio 2 that sounds like a gimbals when you are turning flat or going up on sidewalks for example, it is most likely related to one of the parts of your stabilizer bar that is defective. To verify the origin of the trouble, you may feel a lack of balance in the direction of the vehicle (it pulls to the left or it pulls to the right). Additionally, you can position yourself on one side of one of your front wheels then the other and try to shake your wheels powerfully, if you hear a clicking sound it is highly imaginable that your silentblocks of stabilizer bar are out of date. In this case, go to your garage.
Noise when turning Renault Clio 2 : gimbals
One of the most traditional causes when noise happensand sounds like gimbals on your Renault Clio 2 when you turn with your vehicle is linked to the direction of your vehicle. In fact, the gimbals and their bellows are parts that are constantly stressed during your changes of direction and a wear of one of them can generate “Clac clac” type noises when you get closer to the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on your Renault Clio 2, do not hesitate to consult this article to find the solution to your problem.