Sometimes your vehicle can make noises in the front axle, you are very hardly ever reassured by this sort of noise and you instantly tend to presume that you will lose a wheel or that the fix will cost you an astronomical sum. Then, what if you identify a noise coming from a gimbals of your Peugeot 4007? It may not be much and you can repair the issue yourself, but if in doubt it is better to check before a larger troubles happens. It is with this in mind that we have decided to produce this content and allow you to find out the issue and find a treatment. We will, through different steps review all the components that can make noises at the front end of your Peugeot 4007. 
What are the elements that can cause a noise close to gimbals on Peugeot 4007?
Most of our article will focus on finding the element that gives your Peugeot 4007 gimbals noise. The following is a list of the components that are most likely to be producing it and how to validate it.
Noise vibration that sounds like gimbals on Peugeot 4007 : the shock absorber cup
One of the most classic causes of noises on Peugeot 4007 that sounds like a gimbals is advanced wear and tear on your shock system. In fact, the suspension cups, when they are dead, the rubber (silentblock) that acts as a buffer and shock absorber for the upper part of the suspension no longer does its role and during small jolts that compress the suspensions. To check if this is the issue that worries you, take a dented, slow-speed road and pay attention to the noise coming from your front end as you pass over holes. If these are the cups, think about swapping them soon as this may damage other parts and require more expensive repairs.
Noise while turning that sounds like gimbals Peugeot 4007 : stabilizer bar
If you recognise of a noise on your Peugeot 4007 that sounds like a gimbals when you are turning flat or climbing on sidewalks for example, it is most likely connected to one of the parts of your stabilizer bar that is defective. To validate the origin of the issue, you may feel a lack of stability in the direction of the vehicle (it pulls to the left or it pulls to the right). Furthermore, you can position yourself on one side of one of your front wheels then the other and try to shake your wheels powerfully, if you hear a clicking sound it is highly conceivable that your silentblocks of stabilizer bar are dead. In this case, go to your mechanic.
Noise when turning Peugeot 4007 : gimbals
One of the most traditional causes when noise shows upand sounds like gimbals on your Peugeot 4007 when you turn with your vehicle is in connection with the direction of your vehicle. Certainly, the gimbals and their bellows are parts that are constantly stressed during your changes of direction and a wear of one of them can create “Clac clac” type noises when you reach the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on your Peugeot 4007, do not hesitate to consult this article to find the solution to your problem.
