In some cases your car can make noises in the front axle, you are very almost never reassured by this kind of noise and you straightaway tend to presume that you will lose a wheel or that the fix will cost you an astronomical amount. Thus, what if you detect a noise coming from a gimbals of your Peugeot 306? It may not be much and you can fix the problem yourself, but if in doubt it is better to check before a larger failure appears. It is with this in mind that we have decided to compose this article and allow you to locate the problem and find a treatment. We will, through few steps review all the elements that can create noises at the front end of your Peugeot 306. 
What are the elements that can cause a noise close to gimbals on Peugeot 306?
Most of our article will focus on finding the element that gives your Peugeot 306 gimbals noise. The following is a list of the components that are most likely to be creating it and how to validate it.
Noise vibration that sounds like gimbals on Peugeot 306 : the shock absorber cup
One of the most likely causes of noises on Peugeot 306 that sounds like a gimbals is advanced wear and tear on your suspension system. Indeed, the suspension cups, when they are dead, the rubber (silentblock) that acts as a buffer and shock absorber for the upper part of the suspension no longer fulfils its role and during small jolts that compress the suspensions. To check if this is the problem that concerns you, take a dented, slow-speed road and focus on the noise coming from your front end as you pass over holes. If these are the cups, consider swapping them quickly as this may damage other components and require more costly repairs.
Noise while turning that sounds like gimbals Peugeot 306 : stabilizer bar
If you detect of a noise on your Peugeot 306 that sounds like a gimbals when you are turning flat or climbing on sidewalks for example, it is most likely connected to one of the parts of your stabilizer bar that is defective. To validate the origin of the problem, you may feel a lack of balance in the direction of the car (it pulls to the left or it pulls to the right). Additionally, you can position yourself on one side of one of your front wheels then the other and try to shake your wheels strongly, if you hear a clicking sound it is highly conceivable that your silentblocks of stabilizer bar are dead. In this case, go to your mechanic.
Noise when turning Peugeot 306 : gimbals
One of the most common causes when noise shows upand sounds like gimbals on your Peugeot 306 when you turn with your car is linked to the direction of your car. In fact, the gimbals and their bellows are parts that are continuously stressed during your changes of direction and a wear of one of them can make “Clac clac” type noises when you approach the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on your Peugeot 306, do not hesitate to consult this article to find the solution to your problem.
