On occasion your vehicle can make noises in the front axle, you are very almost never reassured by this sort of noise and you directly tend to think that you will lose a wheel or that the repair will cost you an massive sum. Thus, what if you identify a noise coming from a gimbals of your Peugeot 2008? It may not be much and you can correct the problem yourself, but if in doubt it is better to check before a larger failure occurs. It is with this in mind that we have decided to compose this document and allow you to find out the problem and find a solution. We will, through few steps review all the elements that can make noises at the front end of your Peugeot 2008. 
What are the elements that can cause a noise close to gimbals on Peugeot 2008?
Most of our work will focus on finding the element that gives your Peugeot 2008 gimbals noise. The following is a list of the components that are most likely to be causing it and how to confirm it.
Noise vibration that sounds like gimbals on Peugeot 2008 : the shock absorber cup
One of the most classic causes of noises on Peugeot 2008 that sounds like a gimbals is advanced wear and tear on your shock system. In fact, the suspension cups, when they are out of date, the rubber (silentblock) that acts as a buffer and shock absorber for the upper part of the suspension no longer does its role and during small jolts that compress the suspensions. To check if this is the problem that concerns you, take a dented, slow-speed road and pay attention to the noise coming from your front end as you pass over holes. If these are the cups, think about replacing them soon as this may affect other parts and require more expensive repairs.
Noise while turning that sounds like gimbals Peugeot 2008 : stabilizer bar
If you recognise of a noise on your Peugeot 2008 that sounds like a gimbals when you are turning flat or climbing on sidewalks for example, it is most likely linked to one of the parts of your stabilizer bar that is defective. To confirm the origin of the problem, you may feel a lack of stability in the direction of the vehicle (it pulls to the left or it pulls to the right). Additionally, you can position yourself on one side of one of your front wheels then the other and try to shake your wheels vigorously, if you hear a clicking sound it is highly possible that your silentblocks of stabilizer bar are out of date. In this case, go to your garage.
Noise when turning Peugeot 2008 : gimbals
One of the most traditional causes when noise shows upand sounds like gimbals on your Peugeot 2008 when you turn with your vehicle is linked to the direction of your vehicle. Indeed, the gimbals and their bellows are parts that are continuously stressed during your changes of direction and a wear of one of them can create “Clac clac” type noises when you reach the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on your Peugeot 2008, do not hesitate to consult this article to find the solution to your problem.
