Sometimes your vehicle can make noises in the front axle, you are very almost never reassured by this kind of noise and you automatically tend to think that you will lose a wheel or that the fix will cost you an massive sum. Then, what if you uncover a noise coming from a gimbals of your Mini Mini 3? It may not be much and you can correct the issue yourself, but if in doubt it is better to examine before a larger failure appears. It is with this in mind that we have chosen to produce this content and allow you to discover the issue and find a solution. We will, through some steps review all the elements that can generate noises at the front end of your Mini Mini 3. 
What are the elements that can cause a noise close to gimbals on Mini Mini 3?
Most of our article will focus on finding the element that gives your Mini Mini 3 gimbals noise. The following is a list of the components that are most likely to be causing it and how to verify it.
Noise vibration that sounds like gimbals on Mini Mini 3 : the shock absorber cup
One of the most classic causes of noises on Mini Mini 3 that sounds like a gimbals is advanced wear and tear on your suspension system. Indeed, the suspension cups, when they are dead, the rubber (silentblock) that acts as a buffer and shock absorber for the upper part of the suspension no longer does its role and during small jolts that compress the suspensions. To examine if this is the issue that concerns you, take a dented, slow-speed road and listen to the noise coming from your front end as you pass over holes. If these are the cups, think about replacing them quickly as this may affect other parts and require more expensive repairs.
Noise while turning that sounds like gimbals Mini Mini 3 : stabilizer bar
If you find out of a noise on your Mini Mini 3 that sounds like a gimbals when you are turning flat or going up on sidewalks for example, it is most likely connected to one of the parts of your stabilizer bar that is faulty. To verify the origin of the issue, you may feel a lack of stability in the direction of the automobile (it pulls to the left or it pulls to the right). Also, you can position yourself on one side of one of your front wheels then the other and try to shake your wheels strongly, if you hear a clicking sound it is highly conceivable that your silentblocks of stabilizer bar are dead. In this case, go to your mechanic.
Noise when turning Mini Mini 3 : gimbals
One of the most traditional causes when noise shows upand sounds like gimbals on your Mini Mini 3 when you turn with your automobile is related to the direction of your automobile. Indeed, the gimbals and their bellows are parts that are continuously stressed during your changes of direction and a wear of one of them can make “Clac clac” type noises when you reach the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on your Mini Mini 3, do not hesitate to consult this article to find the solution to your problem.
