In some cases your vehicle can make noises in the front axle, you are very almost never reassured by this sorts of noise and you right away tend to presume that you will lose a wheel or that the repair will cost you an massive amount. Thus, what if you recognize a noise coming from a gimbals of your Mercury Mariner? It may not be much and you can correct the trouble yourself, but if in doubt it is better to check before a larger damage takes place. It is with this in mind that we have decided to produce this document and allow you to locate the trouble and find a solution. We will, through few steps review all the components that can make noises at the front end of your Mercury Mariner. 
What are the elements that can cause a noise close to gimbals on Mercury Mariner?
Most of our job will focus on finding the element that gives your Mercury Mariner gimbals noise. The following is a list of the components that are most likely to be creating it and how to confirm it.
Noise vibration that sounds like gimbals on Mercury Mariner : the shock absorber cup
One of the most likely causes of noises on Mercury Mariner that sounds like a gimbals is advanced wear and tear on your suspension system. In fact, the suspension cups, when they are out of date, the rubber (silentblock) that acts as a buffer and shock absorber for the upper part of the suspension no longer assumes its role and during small jolts that compress the suspensions. To check if this is the trouble that concerns you, take a dented, slow-speed road and listen to the noise coming from your front end as you pass over holes. If these are the cups, consider swapping them as soon as possible as this may damage other components and require more pricey repairs.
Noise while turning that sounds like gimbals Mercury Mariner : stabilizer bar
If you recognise of a noise on your Mercury Mariner that sounds like a gimbals when you are turning flat or climbing on sidewalks for example, it is most likely linked to one of the parts of your stabilizer bar that is malfunctioning. To confirm the origin of the trouble, you may feel a lack of balance in the direction of the vehicle (it pulls to the left or it pulls to the right). Moreover, you can position yourself on one side of one of your front wheels then the other and try to shake your wheels strongly, if you hear a clicking sound it is highly imaginable that your silentblocks of stabilizer bar are out of date. In this case, go to your garage.
Noise when turning Mercury Mariner : gimbals
One of the most common causes when noise happensand sounds like gimbals on your Mercury Mariner when you turn with your vehicle is in connection with the direction of your vehicle. Certainly, the gimbals and their bellows are parts that are continuously stressed during your changes of direction and a wear of one of them can generate “Clac clac” type noises when you reach the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on your Mercury Mariner, do not hesitate to consult this article to find the solution to your problem.
