Sometimes your automobile can make noises in the front axle, you are very almost never reassured by this sorts of noise and you immediately tend to think that you will lose a wheel or that the fix will cost you an massive amount. Thus, what if you recognize a noise coming from a gimbals of your Hyundai Santa Fe? It may not be much and you can resolve the trouble yourself, but if in doubt it is better to verify before a larger troubles occurs. It is with this in mind that we have decided to compose this article and allow you to find out the trouble and find a solution. We will, through several steps review all the elements that can make noises at the front end of your Hyundai Santa Fe. 
What are the elements that can cause a noise close to gimbals on Hyundai Santa Fe?
Most of our work will focus on finding the element that gives your Hyundai Santa Fe gimbals noise. The following is a list of the components that are most likely to be creating it and how to validate it.
Noise vibration that sounds like gimbals on Hyundai Santa Fe : the shock absorber cup
One of the most common reason of noises on Hyundai Santa Fe that sounds like a gimbals is advanced wear and tear on your suspension system. In fact, the suspension cups, when they are dead, the rubber (silentblock) that acts as a buffer and shock absorber for the upper part of the suspension no longer fulfils its role and during small jolts that compress the suspensions. To verify if this is the trouble that concerns you, take a dented, slow-speed road and pay attention to the noise coming from your front end as you pass over holes. If these are the cups, consider changing them soon as this may affect other components and require more costly repairs.
Noise while turning that sounds like gimbals Hyundai Santa Fe : stabilizer bar
If you recognise of a noise on your Hyundai Santa Fe that sounds like a gimbals when you are turning flat or going up on sidewalks for example, it is most likely related to one of the parts of your stabilizer bar that is faulty. To validate the origin of the trouble, you may feel a lack of balance in the direction of the car (it pulls to the left or it pulls to the right). Moreover, you can position yourself on one side of one of your front wheels then the other and try to shake your wheels vigorously, if you hear a clicking sound it is highly conceivable that your silentblocks of stabilizer bar are dead. In this case, go to your garage.
Noise when turning Hyundai Santa Fe : gimbals
One of the most traditional causes when noise appearsand sounds like gimbals on your Hyundai Santa Fe when you turn with your car is connected to the direction of your car. Certainly, the gimbals and their bellows are parts that are constantly stressed during your changes of direction and a wear of one of them can create “Clac clac” type noises when you get closer to the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on your Hyundai Santa Fe, do not hesitate to consult this article to find the solution to your problem.
