On occasion your vehicle can make noises in the front axle, you are very hardly ever reassured by this sorts of noise and you directly tend to think that you will lose a wheel or that the repair will cost you an huge amount. Then, what if you identify a noise coming from a gimbals of your Ford S-max 2? It may not be much and you can fix the problem yourself, but if in doubt it is better to verify before a larger failure takes place. It is with this in mind that we have chosen to produce this document and allow you to locate the problem and find a treatment. We will, through some steps review all the components that can create noises at the front end of your Ford S-max 2. 
What are the elements that can cause a noise close to gimbals on Ford S-max 2?
Most of our job will focus on finding the element that gives your Ford S-max 2 gimbals noise. The following is a list of the components that are most likely to be making it and how to validate it.
Noise vibration that sounds like gimbals on Ford S-max 2 : the shock absorber cup
One of the most common causes of noises on Ford S-max 2 that sounds like a gimbals is advanced wear and tear on your shock system. Indeed, the suspension cups, when they are dead, the rubber (silentblock) that acts as a buffer and shock absorber for the upper part of the suspension no longer fulfils its role and during small jolts that compress the suspensions. To verify if this is the problem that concerns you, take a dented, slow-speed road and listen to the noise coming from your front end as you pass over holes. If these are the cups, consider swapping them soon as this may affect other components and require more pricey repairs.
Noise while turning that sounds like gimbals Ford S-max 2 : stabilizer bar
If you detect of a noise on your Ford S-max 2 that sounds like a gimbals when you are turning flat or going up on sidewalks for example, it is most likely related to one of the parts of your stabilizer bar that is defective. To validate the origin of the problem, you may feel a lack of stability in the direction of the automobile (it pulls to the left or it pulls to the right). Furthermore, you can position yourself on one side of one of your front wheels then the other and try to shake your wheels strongly, if you hear a clicking sound it is highly conceivable that your silentblocks of stabilizer bar are dead. In this case, go to your garage.
Noise when turning Ford S-max 2 : gimbals
One of the most traditional causes when noise appearsand sounds like gimbals on your Ford S-max 2 when you turn with your automobile is linked to the direction of your automobile. Certainly, the gimbals and their bellows are parts that are continuously stressed during your changes of direction and a wear of one of them can create “Clac clac” type noises when you get closer to the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on your Ford S-max 2, do not hesitate to consult this article to find the solution to your problem.
