Sometimes your vehicle can make noises in the front axle, you are very certainly not reassured by this kind of noise and you automatically tend to presume that you will lose a wheel or that the repair will cost you an massive amount. Thus, what if you uncover a noise coming from a gimbals of your Ford Mondeo 4? It may not be much and you can fix the issue yourself, but if in doubt it is better to check before a larger failure takes place. It is with this in mind that we have decided to compose this article and allow you to discover the issue and find a solution. We will, through several steps review all the elements that can generate noises at the front end of your Ford Mondeo 4. 
What are the elements that can cause a noise close to gimbals on Ford Mondeo 4?
Most of our article will focus on finding the element that gives your Ford Mondeo 4 gimbals noise. The following is a list of the components that are most likely to be causing it and how to verify it.
Noise vibration that sounds like gimbals on Ford Mondeo 4 : the shock absorber cup
One of the most common reason of noises on Ford Mondeo 4 that sounds like a gimbals is advanced wear and tear on your suspension system. Indeed, the suspension cups, when they are dead, the rubber (silentblock) that acts as a buffer and shock absorber for the upper part of the suspension no longer fulfils its role and during small jolts that compress the suspensions. To check if this is the issue that concerns you, take a dented, slow-speed road and pay attention to the noise coming from your front end as you pass over holes. If these are the cups, consider swapping them promptly as this may damage other parts and require more pricey repairs.
Noise while turning that sounds like gimbals Ford Mondeo 4 : stabilizer bar
If you recognise of a noise on your Ford Mondeo 4 that sounds like a gimbals when you are turning flat or climbing on sidewalks for example, it is most likely connected to one of the parts of your stabilizer bar that is faulty. To verify the origin of the issue, you may feel a lack of balance in the direction of the vehicle (it pulls to the left or it pulls to the right). Also, you can position yourself on one side of one of your front wheels then the other and try to shake your wheels strongly, if you hear a clicking sound it is highly possible that your silentblocks of stabilizer bar are dead. In this case, go to your mechanic.
Noise when turning Ford Mondeo 4 : gimbals
One of the most common causes when noise shows upand sounds like gimbals on your Ford Mondeo 4 when you turn with your vehicle is related to the direction of your vehicle. In fact, the gimbals and their bellows are parts that are continuously stressed during your changes of direction and a wear of one of them can generate “Clac clac” type noises when you get closer to the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on your Ford Mondeo 4, do not hesitate to consult this article to find the solution to your problem.
