In some cases your vehicle can make noises in the front axle, you are very certainly not reassured by this types of noise and you straightaway tend to presume that you will lose a wheel or that the repair will cost you an huge amount. So, what if you discern a noise coming from a gimbals of your Fiat Punto 2? It may not be much and you can correct the trouble yourself, but if in doubt it is better to check before a larger failure happens. It is with this in mind that we have decided to make this document and allow you to discover the trouble and find a treatment. We will, through several steps review all the elements that can produce noises at the front end of your Fiat Punto 2. 
What are the elements that can cause a noise close to gimbals on Fiat Punto 2?
Most of our work will focus on finding the element that gives your Fiat Punto 2 gimbals noise. The following is a list of the components that are most likely to be generating it and how to confirm it.
Noise vibration that sounds like gimbals on Fiat Punto 2 : the shock absorber cup
One of the most common causes of noises on Fiat Punto 2 that sounds like a gimbals is advanced wear and tear on your suspension system. In fact, the suspension cups, when they are out of date, the rubber (silentblock) that acts as a buffer and shock absorber for the upper part of the suspension no longer fulfils its role and during small jolts that compress the suspensions. To check if this is the trouble that worries you, take a dented, slow-speed road and listen to the noise coming from your front end as you pass over holes. If these are the cups, think about replacing them as soon as possible as this may damage other parts and require more expensive repairs.
Noise while turning that sounds like gimbals Fiat Punto 2 : stabilizer bar
If you find out of a noise on your Fiat Punto 2 that sounds like a gimbals when you are turning flat or climbing on sidewalks for example, it is most likely linked to one of the parts of your stabilizer bar that is faulty. To confirm the origin of the trouble, you may feel a lack of stability in the direction of the vehicle (it pulls to the left or it pulls to the right). Additionally, you can position yourself on one side of one of your front wheels then the other and try to shake your wheels strongly, if you hear a clicking sound it is highly conceivable that your silentblocks of stabilizer bar are out of date. In this case, go to your garage.
Noise when turning Fiat Punto 2 : gimbals
One of the most traditional causes when noise shows upand sounds like gimbals on your Fiat Punto 2 when you turn with your vehicle is related to the direction of your vehicle. Certainly, the gimbals and their bellows are parts that are constantly stressed during your changes of direction and a wear of one of them can make “Clac clac” type noises when you approach the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on your Fiat Punto 2, do not hesitate to consult this article to find the solution to your problem.
