On occasion your vehicle can make noises in the front axle, you are very hardly ever reassured by this sort of noise and you right away tend to presume that you will lose a wheel or that the repair will cost you an huge amount. Then, what if you uncover a noise coming from a gimbals of your BMW X1? It may not be much and you can resolve the issue yourself, but if in doubt it is better to verify before a larger failure happens. It is with this in mind that we have decided to make this article and allow you to locate the issue and find a solution. We will, through some steps review all the elements that can make noises at the front end of your BMW X1. 
What are the elements that can cause a noise close to gimbals on BMW X1?
Most of our work will focus on finding the element that gives your BMW X1 gimbals noise. The following is a list of the components that are most likely to be making it and how to confirm it.
Noise vibration that sounds like gimbals on BMW X1 : the shock absorber cup
One of the most classic reason of noises on BMW X1 that sounds like a gimbals is advanced wear and tear on your shock system. In fact, the suspension cups, when they are dead, the rubber (silentblock) that acts as a buffer and shock absorber for the upper part of the suspension no longer assumes its role and during small jolts that compress the suspensions. To verify if this is the issue that concerns you, take a dented, slow-speed road and listen to the noise coming from your front end as you pass over holes. If these are the cups, think about swapping them soon as this may damage other parts and require more expensive repairs.
Noise while turning that sounds like gimbals BMW X1 : stabilizer bar
If you find out of a noise on your BMW X1 that sounds like a gimbals when you are turning flat or going up on sidewalks for example, it is most likely linked to one of the parts of your stabilizer bar that is defective. To confirm the origin of the issue, you may feel a lack of balance in the direction of the vehicle (it pulls to the left or it pulls to the right). Additionally, you can position yourself on one side of one of your front wheels then the other and try to shake your wheels vigorously, if you hear a clicking sound it is highly imaginable that your silentblocks of stabilizer bar are dead. In this case, go to your garage.
Noise when turning BMW X1 : gimbals
One of the most traditional causes when noise happensand sounds like gimbals on your BMW X1 when you turn with your vehicle is connected to the direction of your vehicle. Indeed, the gimbals and their bellows are parts that are constantly stressed during your changes of direction and a wear of one of them can make “Clac clac” type noises when you get closer to the stop zone of your direction. A bellows with holes will damage the cardan shaft very quickly and must be replaced very quickly, otherwise it will be necessary to change the entire cardan shaft. Remember to take a look at it and have it repaired if necessary. If it is rather a squeaking noise on your BMW X1, do not hesitate to consult this article to find the solution to your problem.
