If you find out about a noise on your car, you are right to get worried about that and take it seriously, although it is possible that nothing significant will result from it, it is also conceivable that it is the first signal of a more important repair. A noise that shows up on a door of your Volkswagen Crafter 2 fortunately shows a slight correction / repair, rather than a complex repair. In order to support you in your approach, we have chosen to produce this article to provide you the most likely solutions to your issue. 1st, we will take a look at the different source noises of air in the door of your Volkswagen Crafter 2, then hinge noises and finally at other possible possibilities.
Door air noise Volkswagen Crafter 2
Plastic air cache noise
If you experience air noise on the doors of your Volkswagen Crafter 2, it is possible that it is linked to some plastic covers on the interior side panels of your door. These can come loose, hole, fall and thus produce an air intake that will obviously generate a distinctive and unpleasant air noise in the passenger compartment. To ensure that you don’t have this issue on your Volkswagen Crafter 2, open your doors and inspect the sides of them carefully, see if all the covers are properly positioned.
Air noise seal
Air noise at the doors of your Volkswagen Crafter 2 can also be connected to a gasketfailing or overused. In fact, the door seal, in addition to have a preventive function against moisture infiltration, also has a protective purpose for air inlets in the passenger compartment. When it is worn, it will not settle and therefore no longer provide a perfect seal between the door and the car body. To check its condition, there are two solutions, first, visually check the state of the seal and for the second test, install someone inside the passenger compartment and door by door, car closed, sprayed with water the seals to see if water gets into. If you are in this case, go to your technician to have your seal swapped and the door noise on your Volkswagen Crafter 2 adjusted.
Hinge noise door hinge Volkswagen Crafter 2
Door noise Volkswagen Crafter 2, dry hinge
It is also possible, depending on the kind of of sound you know, that your hinge is at the origin of them. If this is the case, you will have to check it by opening your door and checking that the door noise on your Volkswagen Crafter 2 comes from a hinge that is too dry. To resolve this issue, first try to grease the hinge, in most cases this is sufficient to solve your issue.
Noise porte Volkswagen Crafter 2, worn hinge
If you have followed our primary advice relating to your hinge, but the issue still persists, it is possible that your hinge is worn out and needs a swap. In this circumstance, check that despite the lubrication it still produces a lot of noise when opening and closing. You should feel a “clack” and restraint in the movement. If this Volkswagen Crafter 2 noise is your problem, change your hinge.
Other possibilities
Internal part of the broken window regulator
In the other possibilities that can generate door noise on Volkswagen Crafter 2, we can first think of the window lift, indeed, after the hinge, it is the second advanced mechanism of the door. If broken, it can create vibration or even air noise. To check its condition, remove the door trim and check that no parts are broken.
unscrewed speaker
Finally, one of the last possible options for Volkswagen Crafter 2 door noise would come from a from your vehicle’s audio speakers. In fact, they take place in the door and can, over time, loosen and generate a heavy vibration and risk damaging themselves if you do not attach them again. Same procedure, you will have to dismantle the door trim to check its correct positioning.
If you can’t find solutions among this article, don’t hesitate to take your car to your technician who can test your car in more detail to discover what the particular issue is that you know.
