If you discover a noise on your car, you are right to feel concerned about that and take it seriously, although it is possible that nothing major will happen from it, it is also possible that it is the first indication of a more significant repair. A noise that appears on a door of your CUPRA FORMENTOR fortunately indicates a slight change / repair, instead of a complex repair. In order to help you in your approach, we have chosen to produce this article to provide you the most likely possibilities to your issue. First of all, we will check out the different source noises of air in the door of your CUPRA FORMENTOR, then hinge noises and finally at other possible possibilities.door-noise-cupra-formentor

Door air noise CUPRA FORMENTOR

Plastic air cache noise

If you encounter air noise on the doors of your CUPRA FORMENTOR, it is plausible that it is linked to some plastic covers on the inside sides of your door. These can come loose, hole, fall and thus create an air intake that will obviously generate a distinctive and annoying air noise in the passenger compartment. To validate that you don’t have this issue on your CUPRA FORMENTOR, open your doors and inspect the sides of them carefully, see if all the covers are properly placed.

Air noise seal

Air noise at the doors of your CUPRA FORMENTOR can also be linked to a gasketfailing or overused. Certainly, the door seal, in addition to have a protective purpose against moisture infiltration, also has a protective purpose for air inlets in the passenger compartment. When it is worn, it will not settle and therefore no longer provide a perfect seal between the door and the car body. To check its condition, there are two solutions, first, visually check the state of the seal and for the second test, install someone inside the passenger compartment and door by door, car closed, sprayed with water the seals to see if water gets into. If you are in this case, go to your mechanic to have your seal exchanged and the door noise on your CUPRA FORMENTOR adjusted.

Hinge noise door hinge CUPRA FORMENTOR

Door noise CUPRA FORMENTOR, dry hinge

It is also possible, in accordance with the type of sound you know, that your hinge is at the origin of them. If this is the case, you will have to check it by opening your door and checking that the door noise on your CUPRA FORMENTOR comes from a hinge that is too dry. To correct this issue, first try to grease the hinge, in most cases this is enough to solve your issue.

Noise porte CUPRA FORMENTOR, worn hinge

If you have followed our first advice regarding your hinge, but the issue still persists, it is possible that your hinge is worn out and necessitates a change. In this case, check that despite the lubrication it still produces a lot of noise when opening and closing. You should feel a “clack” and restraint in the movement. If this CUPRA FORMENTOR noise is your problem, change your hinge.

Other possibilities

Internal part of the damaged window regulator

In the other possibilities that can generate door noise on CUPRA FORMENTOR, we can first think of the window lift, actually, after the hinge, it is the second complex mechanism of the door. If broken, it can create vibration or even air noise. To check its condition, remove the door trim and check that no parts are broken.

unscrewed speaker

Finally, one of the last plausible possibilities for CUPRA FORMENTOR door noise would come from a from your vehicle’s audio speakers. Indeed, they take place in the door and can, over time, loosen and generate a significant vibration and risk damaging themselves if you do not attach them again. Same procedure, you will have to dismantle the door trim to check its correct positioning.
If you can’t find solutions among this document, don’t hesitate to take your car to your mechanic who can look at your car in more detail to discover what the particular issue is that you know.