If you discover a noise on your car, you are right to feel concerned about this and take it seriously, although it is possible that nothing significant will happen from it, it is also imaginable that it is the first signal of a more important repair. A noise that shows up on a door of your Chrysler 200 fortunately suggests a slight modification / repair, instead of a complicated repair. In order to support you in your approach, we have decided to write this document to provide you the most likely possibilities to your problem. First, we will check out the different source noises of air in the door of your Chrysler 200, then hinge noises and finally at other possible possibilities.
Door air noise Chrysler 200
Plastic air cache noise
If you experience air noise on the doors of your Chrysler 200, it is possible that it is linked to some plastic covers on the inside sides of your door. These can come loose, hole, fall and thus create an air intake that will obviously generate a significant and unpleasant air noise in the passenger compartment. To ensure that you don’t have this issue on your Chrysler 200, open your doors and inspect the sides of them carefully, see if all the covers are properly positioned.
Air noise seal
Air noise at the doors of your Chrysler 200 can also be linked to a gasketfailing or overused. In fact, the door seal, in addition to have a preventive function against moisture infiltration, also has a protective task for air inlets in the passenger compartment. When it is worn, it will not settle and therefore no longer create a perfect seal between the door and the car body. To verify its state, there are two techniques, first, visually check the state of the seal and for the second test, install someone inside the passenger compartment and door by door, car closed, sprayed with water the seals to see if water gets into. If you are in this case, go to your mechanic to have your seal replaced and the door noise on your Chrysler 200 adjusted.
Hinge noise door hinge Chrysler 200
Door noise Chrysler 200, dry hinge
It is possible, depending on the type of sound you know, that your hinge is at the origin of them. If this is the case, you will have to verify it by opening your door and checking that the door noise on your Chrysler 200 comes from a hinge that is too dry. To solve this problem, first try to grease the hinge, in most cases this is sufficient to resolve your issue.
Noise porte Chrysler 200, worn hinge
If you have followed our primary advice referring to your hinge, but the issue still remains, it is plausible that your hinge is worn out and necessitates a swap. In this case, verify that despite the lubrication it still causes a lot of noise when opening and closing. You should feel a “clack” and restraint in the movement. If this Chrysler 200 noise is your problem, change your hinge.
Other possibilities
Internal part of the damaged window regulator
In the other possibilities that can create door noise on Chrysler 200, we can first think of the window lift, indeed, after the hinge, it is the second advanced system of the door. If broken, it can create vibration or even air noise. To verify its state, remove the door trim and check that no parts are broken.
unscrewed speaker
Finally, one of the last possible scenarios for Chrysler 200 door noise would come from a from your vehicle’s speakers. Indeed, they take place in the door and can, over time, loosen and generate a heavy vibration and risk damaging themselves if you do not secure them again. Same process, you will have to dismantle the door trim to check its correct positioning.
If you can’t find solutions among this document, don’t hesitate to take your vehicle to your mechanic who can look at your car in more detail to discover what the particular issue is that you know.
