Being subject to recurring noise on your vehicle tends to be frustrating, a vehicle is so complex that it is usually difficult to determine its origin and even more so to find the part that generates it. If you have already experienced a clicking noise on your Nissan X-trail, we will almost certainly be able to help you. In fact, our editorial staff decided to write this article in order to review the main causes of a clicking noise on Nissan X-trail. This is why, firstly, we will see what are the origins of this type of noise coming from your engine block, then those of a noise coming from your direction and finally, the origins of clicking noise on Nissan X-trail coming from your suspensions.
I hear a clicking noise on Nissan X-trail located on my engine
Examine your high engine
If you hear a clicking noise on Nissan X-trail, and this sound is located at the top of the engine, it means that it comes from your cylinder head and its associated parts. Two parts can be the triggers of these ticking noises on Nissan X-trail. Either the hydraulic pushers , in general it is because of their faulty “hydraulic catch-up” system that we will hear these clicking noises, generally when cold and disappear when hot. Otherwise, it is the interplay of your rocker arms or their state of wear that is at issue. In this situation, remember to change them.
Examine your low engine
If you have determined the spot of origin of the Nissan X-trail clikcing noises coming from your low engine, it may be that your rods or piston shafts are the triggers. In both situations, the risk in the long term is the breakage of the motor. These two maintenance are very difficult and most mechanics will advise you to replace the engine of your Nissan X-trail.
Combustion problem
Finally, if you have the feeling that this clicking noise on Nissan X-trail is connected to the combustion of your engine, there are three possible reasons of it. Examine the condition of your glow plugs which, if worn, can hinder the proper combustion of the fuel mixture. Then, it is possible that your timing belt is shifted and that it does not properly manage the timing of the various engine elements to promote good combustion. And finally, the most classic cause, comes from your injection, which is either blocked or one or more injectors are injured. In this circumstance, do not hesitate to consult this article which deals in detail with the different injection sounds on Nissan X-trail.
I hear a clicking noise on Nissan X-trail in my direction
Examine the condition of the gimbals
One of the most regular reasons of a clicking noises in the direction of your Nissan X-trail is linked to the direction of the vehicle. Indeed, the cardans and their bellows are parts that are constantly stressed during your changes of direction or that you turn your wheels and a wear of one of them can generate a ticking type of sound when you get closer to the stop zone of your steering. A bellows with holes will damage the cardan shaft very quickly and must be changed very quickly, otherwise the entire cardan shaft will have to be changed. Consider taking a look at it. If you would like more detailed information about gimbals noises on Nissan X-trail, do not hesitate to read this complete guide.
Examine the rest of your direction
Finally, when you find out a clicking noise on your Nissan X-trail, it is possible that it is the direction that is involved. Just like the gimbals, the steering part is mobilized when you turn your wheels. If this is the circumstance, the parts that may have been damaged due to normal wear and tear or impact (e. g. sidewalks) are steering rods, stabilizer bar silentblocks or steering triangles.
I hear a clicking noise on Nissan X-trail coming from my suspensions
Examine the suspension
If you encounter a clicking noise on your Nissan X-trail once you pass a speed bump, it is highly possible that your suspension block is the reason of the sound. In fact, it may be the suspension cups, which, when they are dead, have the rubber (silentbloc) that acts as a buffer and shock absorber for the upper part of the suspension that no longer fulfils its role and during small jolts that compress the suspensions. To verify if this is the problem that worries you, take a dented road and, at low speed, pay attention to the sound coming from your front axle when you pass over holes. If these are the cups, consider changing them as soon as possible as this may damage other parts and require more expensive repairs.
Check spring and cylinder
If you are subject to a clicking noise on your Nissan X-trail at the suspension level, it is widely possible that spring wear or shock cylinder deformation may be a reason. To verify the state of the spring, position the automobile on a flat surface and measure that the heights from the ground to the bottom of the body are similar on each side (empty car for measurement). You can also verify between the front and rear, if there is a gap too significant it suggests that that most likely your springs are worn, if you see a leak go a little further in the article to have the answer to this problem. For the cylinder the verification is visual, make sure that it seems to work in a straight axis. And that there is no angle that would alter its proper functioning. If one of them breaks in both situations, you should think about changing it or them. If you have the feeling that this noise is more like a squeaking noise on Nissan X-trail than a clicking noise, don’t hesitate to consult this article.
