Being subject to repeated noise on your automobile tends to be disturbing, a automobile is so elaborate that it is usually difficult to situate its origin and even more so to find the part that produces it. If you have already experienced a clicking noise on your Alfa Romeo Mito, we will most likely be able to support you. In fact, our editorial staff decided to compose this article in order to review the main causes of a clicking noise on Alfa Romeo Mito. This is why, firstly, we will check out what are the reasons of this type of noise coming from your engine block, then those of a noise coming from your direction and finally, the origins of clicking noise on Alfa Romeo Mito coming from your suspensions.
I notice a clicking noise on Alfa Romeo Mito from my engine
Check your high engine
If you notice a clicking noise on Alfa Romeo Mito, and this noise is based at the top of the engine, it means that it originates from your cylinder head and its associated parts. Two elements can be the triggers of these ticking noises on Alfa Romeo Mito. Either the hydraulic pushers , in most cases it is because of their faulty “hydraulic catch-up” system that we will notice these clicking noises, generally when cold and go away when hot. Otherwise, it is the interplay of your rocker arms or their state of wear that is at issue. In this case, remember to change them.
Check your low engine
If you have founded the region of origin of the Alfa Romeo Mito clikcing noises coming from your low engine, it may be that your rods or piston shafts are the triggers. In both cases, the risk in the long term is the breakage of the motor. These two maintenance are very complicated and most mechanics will recommend you to swap the engine of your Alfa Romeo Mito.
Combustion problem
Finally, if you have the feeling that this clicking noise on Alfa Romeo Mito is linked to the combustion of your engine, there are three possible reasons of it. Check the state of your glow plugs which, if worn, can hinder the proper combustion of the fuel mixture. Then, it is possible that your timing belt is shifted and that it does not properly manage the timing of the various engine parts to promote good combustion. And finally, the most classic reason, comes from your injection, which is either blocked or one or more injectors are injured. In this case, do not hesitate to consult this article which deals in detail with the different injection sounds on Alfa Romeo Mito.
I notice a clicking noise on Alfa Romeo Mito in my direction
Check the state of the gimbals
One of the most common triggers of a clicking noises in the direction of your Alfa Romeo Mito is linked with the direction of the automobile. Indeed, the cardans and their bellows are parts that are constantly stressed during your changes of direction or that you turn your wheels and a wear of one of them can generate a ticking type of sound when you get closer to the stop zone of your steering. A bellows with holes will harm the cardan shaft very quickly and must be replaced in a short time, otherwise the entire cardan shaft will have to be replaced. Consider taking a look at it. If you would like more detailed information about gimbals noises on Alfa Romeo Mito, do not hesitate to read this complete guide.
Check the rest of your direction
Finally, when you find out a clicking noise on your Alfa Romeo Mito, it is possible that it is the direction that is involved. Just like the gimbals, the steering part is mobilized when you turn your wheels. If this is the case, the parts that may have been damaged due to normal wear and tear or impact (e. g. sidewalks) are steering rods, stabilizer bar silentblocks or steering triangles.
I notice a clicking noise on Alfa Romeo Mito coming from my suspensions
Check the suspension
If you encounter a clicking noise on your Alfa Romeo Mito each time you pass a speed bump, it is extremely possible that your suspension block is the cause of the noise. In fact, it may be the suspension cups, which, when they are dead, have the rubber (silentbloc) that acts as a buffer and shock absorber for the upper part of the suspension that no longer fulfils its function and during small jolts that compress the suspensions. To check if this is the trouble that worries you, take a dented road and, at low speed, focus on the noise originating from your front axle when you pass over holes. If these are the cups, consider changing them soon as this may damage other parts and require more expensive repairs.
Check spring and cylinder
If you hear a clicking noise on your Alfa Romeo Mito at the suspension level, it is widely possible that spring wear or shock cylinder deformation may be a cause. To check the condition of the spring, position the car on a flat surface and measure that the heights from the ground to the bottom of the body are identical on each side (empty car for measurement). You can also check between the front and rear, if there is a gap too significant it suggests that that most likely your springs are worn, if you observe a leak go a little further in the article to have the solution to this problem. For the cylinder the verification is visual, be sure that it seems to work in a straight axis. And that there is no angle that would alter its proper functioning. If one of them breaks in both situations, you should consider replacing it or them. If you have the feeling that this noise is more like a squeaking noise on Alfa Romeo Mito than a clicking noise, don’t hesitate to consult this article.
