It appears sometimes that your car makes noises from your brakes, you are rarely reassured by this kind of noise and you immediately tend to think that you will have an accident or that the repair will cost you an astronomical amount. So, what if you discern noise from the brake on your Seat Ateca? It is probably not some thing severe and you may have the ability to fix it on your own, but when in uncertainty, as with such issue your security and the one from other is in question, it is better to verify before a more serious failure happens. It is with this in mind that we have decided to write this document and give you the chance to locate the issue and find a solution. We will go through different steps, review all possible origins of brake noise on Seat Ateca, and give you the explanations for them in order to assist you solve the issue.brake-noise-seat-ateca

The different sort of brake noise Seat Ateca and their origins

The objective of the Seat Ateca brakes is to come slow down and stop your vehicule. This element is an important part of your vehicle’s safety. Finding out a noise from it must therefore be investigated right away and leaving it lying around is not a good choice.

I experience a grinding noise on my brake Seat Ateca

If you perceive a grinding or scrap metal noise coming from the brake of your Seat Ateca, it is highly conceivable that it will be related to brake pads at the end of their life, indeed, the purpose of the pads is to act as a buffer during braking and they will therefore logically wear out as time passes. Each company gives an average runtime in kilometres for pads, but based on your driving style and route, this may change. Take off the wheels in question and verify the wear indicator on them. If they are out of date, they must be changed quickly as they will quickly damage your discs and keep doing this scrap or grinding noise on Seat Ateca. If after verifying this point, you’re still having a grinding noise on your Seat Ateca, have a look at this article to find a solution.

I encounter a continuous noise that stops when I brake with my Seat Ateca

If you are the victim of a constant noise from the brakes Seat Ateca that only ceases when you press your brake system, it is quite plausible that caliper wear is the reason. Indeed, they can jam as time passes, specifically if they are not used enough. In such a case, they will tend to stay in the closed position, so they will constantly stick the pads against the discs, which will lead to an rise in consumption and precipitate deterioration of your pads. To verify it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.

I encounter vibration when I brake with my Seat Ateca

If in your case, you encounter a vibration when braking that would have come from the brake your Seat Ateca, you will have to worry about the condition of your discs. Discs tend to wear over time and although they have a longer life than pads, they must be changed at some point. A vibration most often notifies of veiled brake disc, you can verify it by removing your wheels. If so, swap them or have them replaced by your mechanic.

I encounter a squealing noise when I brake with my Seat Ateca

Finally, if you ewperience a noise close to a squeak when you use your brakes, it is possible that brake pad dust has settled in the brake calipers of your Seat Ateca, producing a squeak when the system is pressurized. You will have to take it out your wheels and clean the calipers with a snowblower and a brush (metal or rigid).