It occurs in some cases that your car makes noises from your brakes, you are pretty much never reassured by this kind of noise and you instantly tend to think that you will have an accident or that the fix will cost you an astronomical sum. So, what if you find noise from the brake on your Mitsubishi Eclipse? It is probably not anything serious and you would be able to solve it on your own, but when in uncertainty, as with such issue your safety and the one from other is in question, it is better to examine before a more serious failure happens. It is with this in mind that we have made the decision to write this document and give you the chance to find the issue and find a solution. We will go through different steps, review all plausible sources of brake noise on Mitsubishi Eclipse, and offer you the causes for them in order to support you solve the issue.
The different kind of brake noise Mitsubishi Eclipse and their triggers
The function of the Mitsubishi Eclipse brakes is to come slow down and stop your vehicule. This component is an important part of your vehicule’s safety. Finding out a noise from it must therefore be examined immediately and leaving it lying around is not a good answer.
I acknowledge a grinding noise on my brake Mitsubishi Eclipse
If you hear a grinding or scrap metal noise coming from the brake of your Mitsubishi Eclipse, it is highly possible that it will be linked to brake pads at the end of their life, actually, the function of the pads is to act as a buffer during braking and they will therefore naturally wear out as time passes. Each manufacturer gives an average runtime in kilometres for pads, but depending on your driving style and route, this may change. Take out the wheels in question and examine the wear indicator on them. If they are dead, they must be changed quickly as they will very easily ruin your discs and keep doing this scrap or grinding noise on Mitsubishi Eclipse. If after checking out this point, you’re still feeling a grinding noise on your Mitsubishi Eclipse, have a look at this article to find a solution.
I encounter a uninterrupted noise that stops when I brake with my Mitsubishi Eclipse
If you discover a uninterrupted noise from the brakes Mitsubishi Eclipse that only ceases when you press your brake system, it is quite possible that caliper wear is the reason. In fact, they can jam as time passes, specifically if they are not employed enough. In this case, they will tend to stay in the closed situation, so they will always stick the pads against the discs, which will lead to an increase in consumption and precipitate deterioration of your pads. To confirm it, try to brake many times frankly to try to unblock them. If this does not work, it will be necessary to consider changing them.
I encounter vibration when I brake with my Mitsubishi Eclipse
If in your situation, you encounter a vibration when braking that would have come from the brake your Mitsubishi Eclipse, you will have to be concerned about the state of your discs. Discs tend to wear over time and although they have a much longer runtime than pads, they must be replaced at some point. A vibration most often notifies of veiled brake disc, you can examine it by removing your wheels. If so, change them or have them replaced by your auto mechanic.
I feel a squealing noise when I brake with my Mitsubishi Eclipse
Finally, if you feel a noise close to a squeak when you use your brakes, it is plausible that brake pad dust has settled in the brake calipers of your Mitsubishi Eclipse, producing a squeak when the system is pressurized. You will have to remove your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
