It appears sometimes that your car makes noises from your brakes, you are certainly not reassured by this kind of noise and you immediately tend to think that you will have an incident or that the fix will cost you an astronomical sum. So, what if you identify noise from the brake on your Lancia Ypsilon? It might not be anything major and you might have the capability to solve it on your own, but when in doubt, as with such problem your security and the one from other is in question, it is better to verify before a more serious failure occurs. It is with this in mind that we have decided to write this article and give you the opportunity to find the problem and find a solution. We will go through different steps, review all possible origins of brake noise on Lancia Ypsilon, and give you the causes for them in order to support you solve the problem.
The different kind of brake noise Lancia Ypsilon and their triggers
The function of the Lancia Ypsilon brakes is to come slow down and stop your automobile. This component is an fundamental component of your car’s safety. Discovering a sound from it must therefore be examined immediately and leaving it lying around is not a good solution.
I listen to a grinding noise on my brake Lancia Ypsilon
If you find out a grinding or scrap metal noise coming from the brake of your Lancia Ypsilon, it is highly possible that it will be connected to brake pads at the end of their life, indeed, the purpose of the pads is to act as a buffer during braking and they will therefore naturally wear out with time. Each producer gives an average runtime in kilometres for pads, but according to your driving style and route, this may fluctuate. Take out the wheels in question and verify the wear indicator on them. If they are out of date, they must be swapped quickly as they will very easily damage your discs and keep doing this scrap or grinding noise on Lancia Ypsilon. If after verifying this point, you’re still going through a grinding noise on your Lancia Ypsilon, have a look at this article to find a solution.
I feel a continuing noise that stops when I brake with my Lancia Ypsilon
If you experience a regular noise from the brakes Lancia Ypsilon that only stops when you press your brake system, it is quite conceivable that caliper wear is the reason. In fact, they can jam with time, especially if they are not employed enough. In this case, they will tend to stay on in the closed situation, so they will constantly stick the pads against the discs, which will lead to an increase in consumption and precipitate deterioration of your pads. To confirm it, try to brake many times frankly to try to unblock them. If this does not function, it will be necessary to think about swapping them.
I feel vibration when I brake with my Lancia Ypsilon
If in your case, you feel a vibration when braking that would have come from the brake your Lancia Ypsilon, you will have to worry about the condition of your discs. Discs tend to wear over time and although they have a longer life than pads, they must be substituted at some point. A vibration most often shows of veiled brake disc, you can verify it by disassembling your wheels. If so, replace them or have them replaced by your mechanic.
I feel a squealing noise when I brake with my Lancia Ypsilon
Finally, if you ewperience a noise close to a squeak when you use your brakes, it is possible that brake pad dust has settled in the brake calipers of your Lancia Ypsilon, producing a squeak when the system is pressurized. You will have to remove your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
