It appears in some cases that your car makes noises from your brakes, you are almost never reassured by this sort of noise and you instantly tend to think that you will have an accident or that the fix will cost you an astronomical amount of money. So, what if you detect noise from the brake on your Jeep Cherokee? It is probably not anything serious and you would have the capability to fix it on your own, but when in doubt, as with such issue your security and the one from other is in question, it is better to verify before a more serious failure happens. It is with this in mind that we have decided to write this document and give you the chance to find out the issue and find a solution. We will go through different steps, review all possible sources of brake noise on Jeep Cherokee, and give you the explanations for them in order to assist you solve the issue.
The different kind of brake noise Jeep Cherokee and their origins
The objective of the Jeep Cherokee brakes is to come slow down and stop your vehicule. This component is an essential part of your car’s safety. Finding out a sound from it must therefore be looked into immediately and leaving it lying around is not a good answer.
I perceive a grinding noise on my brake Jeep Cherokee
If you perceive a grinding or scrap metal noise coming from the brake of your Jeep Cherokee, it is highly imaginable that it will be linked to brake pads at the end of their existence, indeed, the purpose of the pads is to act as a buffer during braking and they will therefore naturally wear out after some time. Each company gives an average runtime in kilometres for pads, but depending on your driving style and route, this may fluctuate. Take out the wheels in question and verify the wear indicator on them. If they are out of date, they must be replaced quickly as they will promptly ruin your discs and keep doing this scrap or grinding noise on Jeep Cherokee. If after looking at this point, you’re still encountering a grinding noise on your Jeep Cherokee, have a look at this article to find a solution.
I experience a uninterrupted noise that stops when I brake with my Jeep Cherokee
If you notice a continual noise from the brakes Jeep Cherokee that only stops when you press your brake system, it is quite plausible that caliper wear is the reason. In fact, they can jam after some time, especially if they are not employed enough. In such a case, they will tend to stay on in the closed situation, so they will constantly stick the pads against the discs, which will lead to an increase in consumption and premature deterioration of your pads. To confirm it, try to brake several times frankly to try to unblock them. If this does not function, it will be necessary to reflect on replacing them.
I experience vibration when I brake with my Jeep Cherokee
If in your case, you experience a vibration when braking that would have come from the brake your Jeep Cherokee, you will have to be concerned about the condition of your discs. Discs tend to wear over time and although they have a much longer runtime than pads, they must be swapped at some point. A vibration most often notifies of veiled brake disc, you can verify it by disassembling your wheels. If so, change them or have them replaced by your technician.
I experience a squealing noise when I brake with my Jeep Cherokee
Finally, if you have a noise close to a squeak when you use your brakes, it is possible that brake pad dust has settled in the brake calipers of your Jeep Cherokee, causing a squeak when the system is pressurized. You will have to remove your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
