It happens occasionally that your car makes noises from your brakes, you are almost never reassured by this sort of noise and you automatically tend to think that you will have an accident or that the fix will cost you an astronomical sum. So, what if you discern noise from the brake on your Fiat Bravo 2? It may not be some thing severe and you may have the ability to repair it yourself, but when in doubt, as with such trouble your security and the one from other is in question, it is better to verify before a more serious failure happens. It is with this in mind that we have made the decision to write this document and give you the opportunity to locate the trouble and find a solution. We will go through different steps, review all possible origins of brake noise on Fiat Bravo 2, and deliver you the causes for them in order to support you resolve the trouble.
The different sort of brake noise Fiat Bravo 2 and their causes
The function of the Fiat Bravo 2 brakes is to come slow down and stop your automobile. This component is an essential component of your car’s safety. Hearing a noise from it must therefore be examined promptly and leaving it lying around is not a good alternative.
I hear a grinding noise on my brake Fiat Bravo 2
If you perceive a grinding or scrap metal noise coming from the brake of your Fiat Bravo 2, it is highly imaginable that it will be linked to brake pads at the end of their life, actually, the purpose of the pads is to act as a buffer during braking and they will therefore logically wear out over time. Each manufacturer gives an average runtime in kilometres for pads, but based on your driving style and route, this may vary. Remove the wheels in question and verify the wear indicator on them. If they are dead, they must be replaced quickly as they will promptly affect your discs and keep doing this scrap or grinding noise on Fiat Bravo 2. If after checking out this point, you’re still going through a grinding noise on your Fiat Bravo 2, have a look at this article to find a solution.
I experience a regular noise that stops when I brake with my Fiat Bravo 2
If you experience a regular noise from the brakes Fiat Bravo 2 that only stops when you press your brake system, it is quite possible that caliper wear is the cause. Indeed, they can jam over time, specifically if they are not used enough. In such a case, they will tend to stay on in the closed position, so they will constantly stick the pads against the discs, which will lead to an increase in consumption and precipitate deterioration of your pads. To confirm it, try to brake several times frankly to try to unblock them. If this does not function, it will be necessary to consider changing them.
I experience vibration when I brake with my Fiat Bravo 2
If in your situation, you experience a vibration when braking that would have come from the brake your Fiat Bravo 2, you will have to feel concerned about the state of your discs. Discs tend to wear over time and although they have a much longer runtime than pads, they must be replaced at some point. A vibration most often shows of veiled brake disc, you can verify it by disassembling your wheels. If so, replace them or have them replaced by your auto technician.
I notice a squealing noise when I brake with my Fiat Bravo 2
Finally, if you feel a noise close to a squeak when you use your brakes, it is possible that brake pad dust has settled in the brake calipers of your Fiat Bravo 2, creating a squeak when the system is pressurized. You will have to remove your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
