It appears occasionally that your car makes noises from your brakes, you are rarely reassured by this kind of noise and you immediately tend to think that you will have an accident or that the fix will cost you an astronomical sum. So, what if you identify noise from the brake on your Fiat 500 X? It might not be anything serious and you may have the ability to solve it yourself, but when in uncertainty, as with such issue your safety and the one from other is in question, it is better to check before a more serious failure happens. It is with this in mind that we have made the decision to write this content and give you the opportunity to find the issue and find a solution. We will go through different steps, review all plausible origins of brake noise on Fiat 500 X, and give you the reasons for them in order to support you resolve the issue.
The different kind of brake noise Fiat 500 X and their origins
The function of the Fiat 500 X brakes is to come slow down and stop your automobile. This component is an important part of your car’s safety. Finding out a noise from it must therefore be analyzed right away and leaving it lying around is not a good answer.
I notice a grinding noise on my brake Fiat 500 X
If you listen to a grinding or scrap metal noise coming from the brake of your Fiat 500 X, it is highly imaginable that it will be linked to brake pads at the end of their life, actually, the function of the pads is to act as a buffer during braking and they will therefore naturally wear out as time passes. Each manufacturer gives an average runtime in kilometres for pads, but based on your driving style and route, this may differ. Take off the wheels in question and check the wear indicator on them. If they are dead, they must be changed quickly as they will promptly damage your discs and keep doing this scrap or grinding noise on Fiat 500 X. If after checking out this point, you’re still feeling a grinding noise on your Fiat 500 X, have a look at this article to find a solution.
I feel a regular noise that stops when I brake with my Fiat 500 X
If you experience a regular noise from the brakes Fiat 500 X that only ends when you press your brake system, it is quite plausible that caliper wear is the cause. In fact, they can jam as time passes, especially if they are not employed enough. When this happens, they will tend to stay on in the closed situation, so they will constantly stick the pads against the discs, which will lead to an rise in consumption and premature deterioration of your pads. To verify it, try to brake many times frankly to try to unblock them. If this does not function, it will be necessary to reflect on changing them.
I feel vibration when I brake with my Fiat 500 X
If in your case, you feel a vibration when braking that would have come from the brake your Fiat 500 X, you will have to feel concerned about the state of your discs. Discs tend to wear over time and although they have a longer life than pads, they must be swapped at some point. A vibration most often shows of veiled brake disc, you can check it by disassembling your wheels. If so, swap them or have them replaced by your technician.
I encounter a squealing noise when I brake with my Fiat 500 X
Finally, if you notice a noise close to a squeak when you use your brakes, it is plausible that brake pad dust has settled in the brake calipers of your Fiat 500 X, producing a squeak when the system is pressurized. You will have to remove your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
