It appears in some cases that your automobile makes noises from your brakes, you are pretty much never reassured by this kind of noise and you automatically tend to think that you will have an accident or that the repair will cost you an substantial sum. So, what if you find noise from the brake on your BMW 7 Series? It most likely is not anything severe and you might have the ability to solve it on your own, but when in doubt, as with such issue your security and the one from other is in question, it is better to examine before a more serious failure occurs. It is with this in mind that we have made the decision to compose this document and give you the chance to find the issue and find a solution. We will go through several steps, review all possible origins of brake noise on BMW 7 Series, and offer you the reasons for them in order to support you resolve the issue.brake-noise-bmw-7-series

The several sort of brake noise BMW 7 Series and their origins

The function of the BMW 7 Series brakes is to come slow down and stop your car. This component is an fundamental part of your vehicle’s safety. Finding out a sound from it must therefore be looked into quickly and leaving it lying around is not a good solution.

I acknowledge a grinding noise on my brake BMW 7 Series

If you hear a grinding or scrap metal noise coming from the brake of your BMW 7 Series, it is highly possible that it will be related to brake pads at the end of their existence, indeed, the role of the pads is to act as a buffer during braking and they will therefore naturally wear out with time. Each producer gives an average runtime in kilometres for pads, but depending on your driving style and route, this may change. Take off the wheels in question and examine the wear indicator on them. If they are dead, they must be replaced quickly as they will very easily damage your discs and keep doing this scrap or grinding noise on BMW 7 Series. If after looking at this point, you’re still enduring a grinding noise on your BMW 7 Series, have a look at this article to find a solution.

I encounter a continuing noise that stops when I brake with my BMW 7 Series

If you experience a constant noise from the brakes BMW 7 Series that only ends when you press your brake system, it is quite conceivable that caliper wear is the reason. In fact, they can jam with time, specifically if they are not employed enough. In such a case, they will tend to stay in the closed position, so they will constantly stick the pads against the discs, which will lead to an rise in consumption and precipitate deterioration of your pads. To verify it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.

I encounter vibration when I brake with my BMW 7 Series

If in your case, you encounter a vibration when braking that would have come from the brake your BMW 7 Series, you will have to be concerned about the state of your discs. Discs tend to wear over time and although they have a much longer life than pads, they must be changed at some point. A vibration most often informs of veiled brake disc, you can examine it by disassembling your wheels. If so, replace them or have them replaced by your auto mechanic.

I notice a squealing noise when I brake with my BMW 7 Series

Finally, if you notice a noise close to a squeak when you use your brakes, it is possible that brake pad dust has settled in the brake calipers of your BMW 7 Series, producing a squeak when the system is pressurized. You will have to remove your wheels and clean the calipers with a snowblower and a brush (metal or rigid).