It occurs in some cases that your car makes noises from your brakes, you are pretty much never reassured by this sort of noise and you automatically tend to think that you will have an incident or that the repair will cost you an astronomical amount. So, what if you detect noise from the brake on your Audi S3? It is probably not some thing severe and you should have the ability to solve it on your own, but when in uncertainty, as with such problem your safety and the one from other is in question, it is better to verify before a more serious failure happens. It is with this in mind that we have made the decision to create this content and give you the chance to find out the problem and find a solution. We will go through different steps, review all possible origins of brake noise on Audi S3, and give you the causes for them in order to help you solve the problem.
The different types of brake noise Audi S3 and their causes
The objective of the Audi S3 brakes is to come slow down and stop your automobile. This element is an essential element of your vehicule’s safety. Experiencing a noise from it must therefore be looked into immediately and leaving it lying around is not a good choice.
I notice a grinding noise on my brake Audi S3
If you hear a grinding or scrap metal noise coming from the brake of your Audi S3, it is highly imaginable that it will be connected to brake pads at the end of their life, actually, the purpose of the pads is to act as a buffer during braking and they will therefore logically wear out as time passes. Each manufacturer gives an average runtime in kilometres for pads, but according to your driving style and route, this may fluctuate. Remove the wheels in question and verify the wear indicator on them. If they are out of date, they must be changed quickly as they will very easily damage your discs and keep doing this scrap or grinding noise on Audi S3. If after looking at this point, you’re still feeling a grinding noise on your Audi S3, have a look at this article to find a solution.
I experience a continuous noise that stops when I brake with my Audi S3
If you are the victim of a regular noise from the brakes Audi S3 that only ceases when you press your brake system, it is quite plausible that caliper wear is the reason. Indeed, they can jam as time passes, specifically if they are not used enough. When this happens, they will tend to stay on in the closed position, so they will constantly stick the pads against the discs, which will lead to an increase in consumption and precipitate deterioration of your pads. To verify it, try to brake several times frankly to try to unblock them. If this does not function, it will be necessary to reflect on swapping them.
I experience vibration when I brake with my Audi S3
If in your situation, you experience a vibration when braking that would have come from the brake your Audi S3, you will have to feel concerned about the state of your discs. Discs tend to wear over time and although they have a much longer runtime than pads, they must be substituted at some point. A vibration most often shows of veiled brake disc, you can verify it by disassembling your wheels. If so, swap them or have them replaced by your technician.
I encounter a squealing noise when I brake with my Audi S3
Finally, if you ewperience a noise close to a squeak when you use your brakes, it is possible that brake pad dust has settled in the brake calipers of your Audi S3, creating a squeak when the system is pressurized. You will have to remove your wheels and clean the calipers with a snowblower and a brush (metal or rigid).