It happens occasionally that your car makes noises from your brakes, you are certainly not reassured by this sort of noise and you instantly tend to think that you will have an incident or that the repair will cost you an substantial amount of money. So, what if you discover noise from the brake on your Alfa Romeo Mito? It is probably not anything major and you should be able to repair it yourself, but when in doubt, as with such trouble your safety and the one from other is in question, it is better to examine before a more serious failure occurs. It is with this in mind that we have chosen to write this document and give you the chance to find the trouble and find a solution. We will go through different steps, review all possible sources of brake noise on Alfa Romeo Mito, and offer you the explanations for them in order to help you solve the trouble.
The different types of brake noise Alfa Romeo Mito and their origins
The function of the Alfa Romeo Mito brakes is to come slow down and stop your automobile. This component is an essential part of your vehicule’s safety. Hearing a noise from it must therefore be investigated quickly and leaving it lying around is not a good alternative.
I notice a grinding noise on my brake Alfa Romeo Mito
If you listen to a grinding or scrap metal noise coming from the brake of your Alfa Romeo Mito, it is highly conceivable that it will be caused by brake pads at the end of their life, actually, the role of the pads is to act as a buffer during braking and they will therefore logically wear out after some time. Each company gives an average runtime in kilometres for pads, but based on your driving style and route, this may differ. Take out the wheels in question and examine the wear indicator on them. If they are expired, they must be replaced quickly as they will very easily ruin your discs and keep doing this scrap or grinding noise on Alfa Romeo Mito. If after looking at this point, you’re still encountering a grinding noise on your Alfa Romeo Mito, have a look at this article to find a solution.
I feel a continuous noise that stops when I brake with my Alfa Romeo Mito
If you discover a continual noise from the brakes Alfa Romeo Mito that only ends when you press your brake system, it is quite conceivable that caliper wear is the cause. In fact, they can jam after some time, specifically if they are not used enough. When this happens, they will tend to stay in the closed position, so they will always stick the pads against the discs, which will lead to an rise in consumption and precipitate deterioration of your pads. To verify it, try to brake many times frankly to try to unblock them. If this does not function, it will be necessary to reflect on changing them.
I feel vibration when I brake with my Alfa Romeo Mito
If in your situation, you feel a vibration when braking that would have come from the brake your Alfa Romeo Mito, you will have to worry about the condition of your discs. Discs tend to wear over time and although they have a longer runtime than pads, they must be replaced at some point. A vibration most often shows of veiled brake disc, you can examine it by disassembling your wheels. If so, replace them or have them replaced by your mechanic.
I feel a squealing noise when I brake with my Alfa Romeo Mito
Finally, if you feel a noise close to a squeak when you use your brakes, it is possible that brake pad dust has settled in the brake calipers of your Alfa Romeo Mito, creating a squeak when the system is pressurized. You will have to remove your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
