It appears in some cases that your car makes noises in the brake calipers, you are pretty much never reassured by this sorts of noise and you automatically tend to think that you will have an incident or that the repair will cost you an substantial amount. So, what if you detect noise from the brake calipers on your Volkswagen Polo 3? It may not be anything serious and you may be able to fix it yourself, but when in uncertainty, since your safety and the one of others is in question, it is better to check before a more serious failure occurs. It is with this in mind that we have chosen to write this content and give you the opportunity to find the problem and find a solution. We will go through different steps, review all possible origins of caliper brake noise on Volkswagen Polo 3, and give you the reasons for them in order to help you resolve the issue.
The different types of brake caliper noise on Volkswagen Polo 3 and their causes
The objective of the Volkswagen Polo 3 brake calipers is to come pinch the brake discs of your Volkswagen Polo 3 thanks to the pads they will activate. This component is an important element of your vehicle’s safety. Finding out a noise from it must therefore be examined immediately and leaving it lying around is not a good solution.
I hear a grinding noise on my brake calipers on Volkswagen Polo 3
If you find out a grinding or scrap metal noise coming from the brake calipers of your Volkswagen Polo 3, it is highly imaginable that it will be related to brake pads at the end of their existence, in fact, the purpose of the pads is to act as a buffer during braking and they will therefore logically wear out over time. Each manufacturer gives an average runtime in kilometres for pads, but according to your driving style and route, this may fluctuate. Remove the wheels in question and check the wear indicator on them. If they are dead, they must be swapped quickly as they will quickly ruin your discs and keep doing this scrap or grinding noise on Volkswagen Polo 3. If after examining this point, you’re still enduring a grinding noise on your Volkswagen Polo 3, have a look at this article to find a solution.
I encounter a continuous noise that stops when I brake from my Volkswagen Polo 3 brake calipers
If you are the victim of a continuous noise in the brake calipers of your Volkswagen Polo 3 that only stops when you press your brake system, it is quite conceivable that caliper wear is the cause. Indeed, they can jam after some time, especially if they are not used enough. When this happens, they will tend to remain in the closed situation, so they will constantly stick the pads against the discs, which will lead to an rise in consumption and premature deterioration of your pads. To verify it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Volkswagen Polo 3
If in your case, you encounter a vibration when braking that would have come from the brake calipers of your Volkswagen Polo 3, you will have to be concerned about the state of your discs. Discs tend to wear over time and although they have a much longer runtime than pads, they must be replaced at some point. A vibration most often informs of veiled brake disc, you can check it by disassembling your wheels. If so, change them or have them replaced by your auto mechanic.
When I brake, I encounter a squealing in my brake calipers of my Volkswagen Polo 3
Finally, if you have a noise close to a squeak when you use your brakes, it is plausible that brake pad dust has settled in the brake calipers of your Volkswagen Polo 3, causing a squeak when the system is pressurized. You will have to remove your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
