It appears in some cases that your car makes noises in the brake calipers, you are almost never reassured by this types of noise and you automatically tend to think that you will have an accident or that the fix will cost you an astronomical amount. So, what if you identify noise from the brake calipers on your Volkswagen Atlas? It is probably not anything major and you may be able to repair it yourself, but when in doubt, since your safety and the one of others is in question, it is better to examine before a more serious failure happens. It is with this in mind that we have decided to compose this content and give you the chance to find the problem and find a solution. We will go through different steps, review all possible origins of caliper brake noise on Volkswagen Atlas, and give you the reasons for them in order to help you resolve the issue.
The different types of brake caliper noise on Volkswagen Atlas and their causes
The function of the Volkswagen Atlas brake calipers is to come pinch the brake discs of your Volkswagen Atlas thanks to the pads they will activate. This element is an fundamental element of your vehicle’s safety. Hearing a noise from it must therefore be looked into right away and leaving it lying around is not a good choice.
I hear a grinding noise on my brake calipers on Volkswagen Atlas
If you notice a grinding or scrap metal noise coming from the brake calipers of your Volkswagen Atlas, it is highly imaginable that it will be linked to brake pads at the end of their life, actually, the role of the pads is to act as a buffer during braking and they will therefore logically wear out over time. Each company gives an average runtime in kilometres for pads, but according to your driving style and route, this may vary. Remove the wheels in question and check the wear indicator on them. If they are dead, they must be replaced quickly as they will promptly affect your discs and keep doing this scrap or grinding noise on Volkswagen Atlas. If after verifying this point, you’re still encountering a grinding noise on your Volkswagen Atlas, have a look at this article to find a solution.
I experience a frequent noise that stops when I brake from my Volkswagen Atlas brake calipers
If you are the victim of a regular noise in the brake calipers of your Volkswagen Atlas that only stops when you press your brake system, it is quite plausible that caliper wear is the cause. In fact, they can jam with time, especially if they are not employed enough. In this case, they will tend to stay on in the closed position, so they will constantly stick the pads against the discs, which will lead to an rise in consumption and precipitate deterioration of your pads. To verify it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Volkswagen Atlas
If in your case, you experience a vibration when braking that would have come from the brake calipers of your Volkswagen Atlas, you will have to worry about the condition of your discs. Discs tend to wear over time and although they have a much longer runtime than pads, they must be changed at some point. A vibration most often shows of veiled brake disc, you can check it by disassembling your wheels. If so, replace them or have them replaced by your technician.
When I brake, I experience a squealing in my brake calipers of my Volkswagen Atlas
Finally, if you have a noise close to a squeak when you use your brakes, it is plausible that brake pad dust has settled in the brake calipers of your Volkswagen Atlas, creating a squeak when the system is pressurized. You will have to remove your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
