It occurs occasionally that your automobile makes noises in the brake calipers, you are rarely reassured by this kind of noise and you automatically tend to think that you will have an incident or that the fix will cost you an astronomical amount of money. So, what if you discover noise from the brake calipers on your Toyota Auris 2? It is probably not anything severe and you may be able to fix it yourself, but when in uncertainty, since your safety and the one of others is in question, it is better to verify before a more serious failure happens. It is with this in mind that we have made the decision to compose this article and give you the chance to find out the problem and find a solution. We will go through different steps, review all possible origins of caliper brake noise on Toyota Auris 2, and give you the explanations for them in order to help you fix the problem.
The different types of brake caliper noise on Toyota Auris 2 and their causes
The function of the Toyota Auris 2 brake calipers is to come pinch the brake discs of your Toyota Auris 2 thanks to the pads they will activate. This component is an essential element of your vehicle’s safety. Finding out a noise from it must therefore be analyzed right away and leaving it lying around is not a good solution.
I hear a grinding noise on my brake calipers on Toyota Auris 2
If you find out a grinding or scrap metal noise coming from the brake calipers of your Toyota Auris 2, it is highly imaginable that it will be related to brake pads at the end of their life, actually, the purpose of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average runtime in kilometres for pads, but depending on your driving style and route, this may differ. Remove the wheels in question and check the wear indicator on them. If they are dead, they must be swapped quickly as they will promptly affect your discs and keep doing this scrap or grinding noise on Toyota Auris 2. If after verifying this point, you’re still experiencing a grinding noise on your Toyota Auris 2, have a look at this article to find a solution.
I experience a constant noise that stops when I brake from my Toyota Auris 2 brake calipers
If you are the victim of a continuous noise in the brake calipers of your Toyota Auris 2 that only stops when you press your brake system, it is quite conceivable that caliper wear is the cause. In fact, they can jam over time, especially if they are not used enough. In such a case, they will tend to keep on being in the closed situation, so they will constantly stick the pads against the discs, which will lead to an rise in consumption and premature deterioration of your pads. To verify it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Toyota Auris 2
If in your case, you experience a vibration when braking that would have come from the brake calipers of your Toyota Auris 2, you will have to get worried about the state of your discs. Discs tend to wear over time and although they have a longer life than pads, they must be swapped at some point. A vibration most often notifies of veiled brake disc, you can check it by removing your wheels. If so, change them or have them replaced by your mechanic.
When I brake, I experience a squealing in my brake calipers of my Toyota Auris 2
Finally, if you have a noise close to a squeak when you use your brakes, it is plausible that brake pad dust has settled in the brake calipers of your Toyota Auris 2, producing a squeak when the system is pressurized. You will have to take it out your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
