It occurs occasionally that your car makes noises in the brake calipers, you are pretty much never reassured by this sort of noise and you automatically tend to think that you will have an accident or that the repair will cost you an astronomical amount of money. So, what if you find noise from the brake calipers on your Suzuki Alto? It may not be anything serious and you may be able to solve it yourself, but when in doubt, since your safety and the one of others is in question, it is better to examine before a more serious failure occurs. It is with this in mind that we have decided to write this content and give you the opportunity to locate the problem and find a solution. We will go through different steps, review all possible origins of caliper brake noise on Suzuki Alto, and give you the causes for them in order to help you fix the trouble.
The different types of brake caliper noise on Suzuki Alto and their causes
The objective of the Suzuki Alto brake calipers is to come pinch the brake discs of your Suzuki Alto thanks to the pads they will activate. This element is an essential element of your vehicle’s safety. Experiencing a noise from it must therefore be looked into promptly and leaving it lying around is not a good alternative.
I hear a grinding noise on my brake calipers on Suzuki Alto
If you listen to a grinding or scrap metal noise coming from the brake calipers of your Suzuki Alto, it is highly conceivable that it will be linked to brake pads at the end of their existence, in fact, the purpose of the pads is to act as a buffer during braking and they will therefore logically wear out over time. Each manufacturer gives an average runtime in kilometres for pads, but according to your driving style and route, this may vary. Remove the wheels in question and check the wear indicator on them. If they are out of date, they must be swapped quickly as they will promptly damage your discs and keep doing this scrap or grinding noise on Suzuki Alto. If after looking at this point, you’re still having a grinding noise on your Suzuki Alto, have a look at this article to find a solution.
I feel a constant noise that stops when I brake from my Suzuki Alto brake calipers
If you are the victim of a constant noise in the brake calipers of your Suzuki Alto that only stops when you press your brake system, it is quite possible that caliper wear is the cause. Indeed, they can jam over time, specifically if they are not employed enough. In such a case, they will tend to remain in the closed position, so they will always stick the pads against the discs, which will lead to an rise in consumption and precipitate deterioration of your pads. To confirm it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Suzuki Alto
If in your case, you feel a vibration when braking that would have come from the brake calipers of your Suzuki Alto, you will have to get worried about the state of your discs. Discs tend to wear over time and although they have a much longer life than pads, they must be substituted at some point. A vibration most often shows of veiled brake disc, you can check it by removing your wheels. If so, replace them or have them replaced by your auto technician.
When I brake, I feel a squealing in my brake calipers of my Suzuki Alto
Finally, if you have a noise close to a squeak when you use your brakes, it is plausible that brake pad dust has settled in the brake calipers of your Suzuki Alto, producing a squeak when the system is pressurized. You will have to take it out your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
