It appears in some cases that your automobile makes noises in the brake calipers, you are almost never reassured by this types of noise and you automatically tend to think that you will have an incident or that the fix will cost you an substantial sum. So, what if you identify noise from the brake calipers on your Subaru Legacy? It most likely is not anything severe and you may be able to solve it yourself, but when in doubt, since your safety and the one of others is in question, it is better to verify before a more serious failure happens. It is with this in mind that we have chosen to compose this document and give you the opportunity to find the problem and find a solution. We will go through different steps, review all possible sources of caliper brake noise on Subaru Legacy, and give you the explanations for them in order to help you resolve the issue.
The different types of brake caliper noise on Subaru Legacy and their causes
The function of the Subaru Legacy brake calipers is to come pinch the brake discs of your Subaru Legacy thanks to the pads they will activate. This component is an fundamental element of your vehicle’s safety. Experiencing a noise from it must therefore be investigated right away and leaving it lying around is not a good answer.
I hear a grinding noise on my brake calipers on Subaru Legacy
If you find out a grinding or scrap metal noise coming from the brake calipers of your Subaru Legacy, it is highly imaginable that it will be linked to brake pads at the end of their existence, actually, the role of the pads is to act as a buffer during braking and they will therefore logically wear out over time. Each company gives an average runtime in kilometres for pads, but according to your driving style and route, this may fluctuate. Remove the wheels in question and check the wear indicator on them. If they are out of date, they must be replaced quickly as they will very easily ruin your discs and keep doing this scrap or grinding noise on Subaru Legacy. If after examining this point, you’re still encountering a grinding noise on your Subaru Legacy, have a look at this article to find a solution.
I experience a continuous noise that stops when I brake from my Subaru Legacy brake calipers
If you are the victim of a regular noise in the brake calipers of your Subaru Legacy that only stops when you press your brake system, it is quite conceivable that caliper wear is the cause. In fact, they can jam over time, especially if they are not used enough. In this case, they will tend to keep on being in the closed position, so they will constantly stick the pads against the discs, which will lead to an increase in consumption and precipitate deterioration of your pads. To confirm it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Subaru Legacy
If in your case, you experience a vibration when braking that would have come from the brake calipers of your Subaru Legacy, you will have to feel concerned about the condition of your discs. Discs tend to wear over time and although they have a much longer runtime than pads, they must be swapped at some point. A vibration most often shows of veiled brake disc, you can check it by removing your wheels. If so, swap them or have them replaced by your mechanic.
When I brake, I experience a squealing in my brake calipers of my Subaru Legacy
Finally, if you have a noise close to a squeak when you use your brakes, it is plausible that brake pad dust has settled in the brake calipers of your Subaru Legacy, causing a squeak when the system is pressurized. You will have to take it out your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
