It appears sometimes that your automobile makes noises in the brake calipers, you are rarely reassured by this sort of noise and you automatically tend to think that you will have an accident or that the fix will cost you an substantial sum. So, what if you detect noise from the brake calipers on your Seat Ateca? It might not be some thing serious and you may be able to repair it yourself, but when in uncertainty, since your safety and the one of others is in question, it is better to check before a more serious failure happens. It is with this in mind that we have decided to compose this article and give you the opportunity to locate the problem and find a solution. We will go through different steps, review all possible sources of caliper brake noise on Seat Ateca, and give you the explanations for them in order to help you fix the problem.
The different types of brake caliper noise on Seat Ateca and their causes
The function of the Seat Ateca brake calipers is to come pinch the brake discs of your Seat Ateca thanks to the pads they will activate. This component is an important element of your vehicle’s safety. Experiencing a noise from it must therefore be looked into right away and leaving it lying around is not a good solution.
I hear a grinding noise on my brake calipers on Seat Ateca
If you perceive a grinding or scrap metal noise coming from the brake calipers of your Seat Ateca, it is highly conceivable that it will be connected to brake pads at the end of their existence, indeed, the role of the pads is to act as a buffer during braking and they will therefore logically wear out over time. Each company gives an average runtime in kilometres for pads, but based on your driving style and route, this may fluctuate. Remove the wheels in question and check the wear indicator on them. If they are dead, they must be replaced quickly as they will promptly damage your discs and keep doing this scrap or grinding noise on Seat Ateca. If after checking this point, you’re still having a grinding noise on your Seat Ateca, have a look at this article to find a solution.
I feel a frequent noise that stops when I brake from my Seat Ateca brake calipers
If you are the victim of a constant noise in the brake calipers of your Seat Ateca that only stops when you press your brake system, it is quite conceivable that caliper wear is the cause. Indeed, they can jam with time, especially if they are not employed enough. When this happens, they will tend to remain in the closed situation, so they will always stick the pads against the discs, which will lead to an rise in consumption and premature deterioration of your pads. To verify it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Seat Ateca
If in your case, you feel a vibration when braking that would have come from the brake calipers of your Seat Ateca, you will have to worry about the state of your discs. Discs tend to wear over time and although they have a much longer life than pads, they must be substituted at some point. A vibration most often notifies of veiled brake disc, you can check it by removing your wheels. If so, replace them or have them replaced by your auto technician.
When I brake, I feel a squealing in my brake calipers of my Seat Ateca
Finally, if you have a noise close to a squeak when you use your brakes, it is possible that brake pad dust has settled in the brake calipers of your Seat Ateca, creating a squeak when the system is pressurized. You will have to take it out your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
