It occurs sometimes that your automobile makes noises in the brake calipers, you are almost never reassured by this sorts of noise and you instantly tend to think that you will have an incident or that the repair will cost you an substantial amount. So, what if you identify noise from the brake calipers on your Renault Maxity? It most likely is not some thing severe and you may be able to solve it yourself, but when in doubt, since your safety and the one of others is in question, it is better to verify before a more serious failure happens. It is with this in mind that we have made the decision to write this article and give you the opportunity to locate the problem and find a solution. We will go through different steps, review all possible origins of caliper brake noise on Renault Maxity, and give you the causes for them in order to help you fix the problem.brake-caliper-noiserenault-maxity

The different types of brake caliper noise on Renault Maxity and their causes

The objective of the Renault Maxity brake calipers is to come pinch the brake discs of your Renault Maxity thanks to the pads they will activate. This element is an essential element of your vehicle’s safety. Finding out a noise from it must therefore be analyzed immediately and leaving it lying around is not a good answer.

I hear a grinding noise on my brake calipers on Renault Maxity

If you hear a grinding or scrap metal noise coming from the brake calipers of your Renault Maxity, it is highly imaginable that it will be connected to brake pads at the end of their existence, actually, the role of the pads is to act as a buffer during braking and they will therefore logically wear out over time. Each producer gives an average runtime in kilometres for pads, but depending on your driving style and route, this may fluctuate. Remove the wheels in question and check the wear indicator on them. If they are out of date, they must be swapped quickly as they will quickly affect your discs and keep doing this scrap or grinding noise on Renault Maxity. If after looking at this point, you’re still enduring a grinding noise on your Renault Maxity, have a look at this article to find a solution.

I experience a constant noise that stops when I brake from my Renault Maxity brake calipers

If you are the victim of a continuous noise in the brake calipers of your Renault Maxity that only stops when you press your brake system, it is quite conceivable that caliper wear is the cause. In fact, they can jam after some time, specifically if they are not employed enough. In this case, they will tend to stay on in the closed situation, so they will constantly stick the pads against the discs, which will lead to an rise in consumption and premature deterioration of your pads. To verify it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.

When I brake, my brake pedal vibrates on my Renault Maxity

If in your case, you experience a vibration when braking that would have come from the brake calipers of your Renault Maxity, you will have to get worried about the state of your discs. Discs tend to wear over time and although they have a much longer runtime than pads, they must be changed at some point. A vibration most often informs of veiled brake disc, you can check it by removing your wheels. If so, replace them or have them replaced by your mechanic.

When I brake, I experience a squealing in my brake calipers of my Renault Maxity

Finally, if you have a noise close to a squeak when you use your brakes, it is possible that brake pad dust has settled in the brake calipers of your Renault Maxity, creating a squeak when the system is pressurized. You will have to take it out your wheels and clean the calipers with a snowblower and a brush (metal or rigid).