It happens sometimes that your car makes noises in the brake calipers, you are almost never reassured by this sorts of noise and you instantly tend to think that you will have an accident or that the repair will cost you an substantial sum. So, what if you find noise from the brake calipers on your Renault Kangoo 2? It might not be some thing serious and you may be able to repair it yourself, but when in uncertainty, since your safety and the one of others is in question, it is better to verify before a more serious failure happens. It is with this in mind that we have chosen to write this document and give you the chance to locate the problem and find a solution. We will go through different steps, review all possible sources of caliper brake noise on Renault Kangoo 2, and give you the explanations for them in order to help you solve the problem.
The different types of brake caliper noise on Renault Kangoo 2 and their causes
The function of the Renault Kangoo 2 brake calipers is to come pinch the brake discs of your Renault Kangoo 2 thanks to the pads they will activate. This element is an essential element of your vehicle’s safety. Finding out a sound from it must therefore be analyzed promptly and leaving it lying around is not a good solution.
I hear a grinding noise on my brake calipers on Renault Kangoo 2
If you notice a grinding or scrap metal noise coming from the brake calipers of your Renault Kangoo 2, it is highly conceivable that it will be related to brake pads at the end of their life, indeed, the role of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average runtime in kilometres for pads, but according to your driving style and route, this may fluctuate. Remove the wheels in question and check the wear indicator on them. If they are expired, they must be swapped quickly as they will promptly damage your discs and keep doing this scrap or grinding noise on Renault Kangoo 2. If after checking out this point, you’re still encountering a grinding noise on your Renault Kangoo 2, have a look at this article to find a solution.
I encounter a frequent noise that stops when I brake from my Renault Kangoo 2 brake calipers
If you are the victim of a constant noise in the brake calipers of your Renault Kangoo 2 that only stops when you press your brake system, it is quite conceivable that caliper wear is the cause. In fact, they can jam as time passes, especially if they are not employed enough. In such a case, they will tend to remain in the closed position, so they will always stick the pads against the discs, which will lead to an rise in consumption and premature deterioration of your pads. To confirm it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Renault Kangoo 2
If in your case, you encounter a vibration when braking that would have come from the brake calipers of your Renault Kangoo 2, you will have to worry about the state of your discs. Discs tend to wear over time and although they have a longer life than pads, they must be changed at some point. A vibration most often shows of veiled brake disc, you can check it by removing your wheels. If so, swap them or have them replaced by your technician.
When I brake, I encounter a squealing in my brake calipers of my Renault Kangoo 2
Finally, if you have a noise close to a squeak when you use your brakes, it is plausible that brake pad dust has settled in the brake calipers of your Renault Kangoo 2, causing a squeak when the system is pressurized. You will have to remove your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
