It occurs sometimes that your automobile makes noises in the brake calipers, you are certainly not reassured by this sort of noise and you automatically tend to think that you will have an accident or that the repair will cost you an astronomical amount. So, what if you find noise from the brake calipers on your Ram ProMaster? It might not be anything major and you may be able to repair it yourself, but when in uncertainty, since your safety and the one of others is in question, it is better to verify before a more serious failure occurs. It is with this in mind that we have chosen to create this article and give you the chance to find out the problem and find a solution. We will go through different steps, review all possible sources of caliper brake noise on Ram ProMaster, and give you the explanations for them in order to help you solve the trouble.
The different types of brake caliper noise on Ram ProMaster and their causes
The objective of the Ram ProMaster brake calipers is to come pinch the brake discs of your Ram ProMaster thanks to the pads they will activate. This component is an important element of your vehicle’s safety. Hearing a noise from it must therefore be examined quickly and leaving it lying around is not a good choice.
I hear a grinding noise on my brake calipers on Ram ProMaster
If you perceive a grinding or scrap metal noise coming from the brake calipers of your Ram ProMaster, it is highly imaginable that it will be related to brake pads at the end of their existence, in fact, the purpose of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each company gives an average runtime in kilometres for pads, but according to your driving style and route, this may change. Remove the wheels in question and check the wear indicator on them. If they are expired, they must be changed quickly as they will promptly affect your discs and keep doing this scrap or grinding noise on Ram ProMaster. If after examining this point, you’re still experiencing a grinding noise on your Ram ProMaster, have a look at this article to find a solution.
I encounter a frequent noise that stops when I brake from my Ram ProMaster brake calipers
If you are the victim of a constant noise in the brake calipers of your Ram ProMaster that only stops when you press your brake system, it is quite conceivable that caliper wear is the reason. In fact, they can jam over time, especially if they are not employed enough. In such a case, they will tend to stay on in the closed situation, so they will always stick the pads against the discs, which will lead to an increase in consumption and premature deterioration of your pads. To verify it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Ram ProMaster
If in your case, you encounter a vibration when braking that would have come from the brake calipers of your Ram ProMaster, you will have to feel concerned about the state of your discs. Discs tend to wear over time and although they have a much longer life than pads, they must be substituted at some point. A vibration most often shows of veiled brake disc, you can check it by disassembling your wheels. If so, replace them or have them replaced by your technician.
When I brake, I encounter a squealing in my brake calipers of my Ram ProMaster
Finally, if you have a noise close to a squeak when you use your brakes, it is plausible that brake pad dust has settled in the brake calipers of your Ram ProMaster, creating a squeak when the system is pressurized. You will have to remove your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
