It appears occasionally that your automobile makes noises in the brake calipers, you are pretty much never reassured by this sort of noise and you immediately tend to think that you will have an incident or that the repair will cost you an substantial sum. So, what if you find noise from the brake calipers on your Peugeot 2008? It might not be some thing severe and you may be able to solve it yourself, but when in doubt, since your safety and the one of others is in question, it is better to check before a more serious failure happens. It is with this in mind that we have chosen to create this article and give you the opportunity to find the problem and find a solution. We will go through different steps, review all possible origins of caliper brake noise on Peugeot 2008, and give you the causes for them in order to help you solve the problem.
The different types of brake caliper noise on Peugeot 2008 and their causes
The function of the Peugeot 2008 brake calipers is to come pinch the brake discs of your Peugeot 2008 thanks to the pads they will activate. This component is an important element of your vehicle’s safety. Finding out a sound from it must therefore be analyzed promptly and leaving it lying around is not a good choice.
I hear a grinding noise on my brake calipers on Peugeot 2008
If you listen to a grinding or scrap metal noise coming from the brake calipers of your Peugeot 2008, it is highly imaginable that it will be connected to brake pads at the end of their existence, in fact, the function of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each company gives an average runtime in kilometres for pads, but based on your driving style and route, this may fluctuate. Remove the wheels in question and check the wear indicator on them. If they are expired, they must be swapped quickly as they will very easily affect your discs and keep doing this scrap or grinding noise on Peugeot 2008. If after checking this point, you’re still experiencing a grinding noise on your Peugeot 2008, have a look at this article to find a solution.
I experience a continuous noise that stops when I brake from my Peugeot 2008 brake calipers
If you are the victim of a regular noise in the brake calipers of your Peugeot 2008 that only stops when you press your brake system, it is quite conceivable that caliper wear is the reason. Indeed, they can jam with time, specifically if they are not used enough. In this case, they will tend to keep on being in the closed situation, so they will always stick the pads against the discs, which will lead to an increase in consumption and premature deterioration of your pads. To confirm it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Peugeot 2008
If in your case, you experience a vibration when braking that would have come from the brake calipers of your Peugeot 2008, you will have to worry about the state of your discs. Discs tend to wear over time and although they have a longer runtime than pads, they must be substituted at some point. A vibration most often notifies of veiled brake disc, you can check it by disassembling your wheels. If so, change them or have them replaced by your mechanic.
When I brake, I experience a squealing in my brake calipers of my Peugeot 2008
Finally, if you have a noise close to a squeak when you use your brakes, it is plausible that brake pad dust has settled in the brake calipers of your Peugeot 2008, causing a squeak when the system is pressurized. You will have to remove your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
