It appears in some cases that your automobile makes noises in the brake calipers, you are certainly not reassured by this kind of noise and you instantly tend to think that you will have an accident or that the fix will cost you an astronomical amount of money. So, what if you discover noise from the brake calipers on your Mitsubishi Asx? It is probably not anything serious and you may be able to solve it yourself, but when in doubt, since your safety and the one of others is in question, it is better to examine before a more serious failure happens. It is with this in mind that we have decided to write this article and give you the chance to find out the problem and find a solution. We will go through different steps, review all possible sources of caliper brake noise on Mitsubishi Asx, and give you the causes for them in order to help you solve the problem.
The different types of brake caliper noise on Mitsubishi Asx and their causes
The objective of the Mitsubishi Asx brake calipers is to come pinch the brake discs of your Mitsubishi Asx thanks to the pads they will activate. This element is an important element of your vehicle’s safety. Experiencing a sound from it must therefore be looked into promptly and leaving it lying around is not a good choice.
I hear a grinding noise on my brake calipers on Mitsubishi Asx
If you hear a grinding or scrap metal noise coming from the brake calipers of your Mitsubishi Asx, it is highly conceivable that it will be connected to brake pads at the end of their life, actually, the purpose of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average runtime in kilometres for pads, but based on your driving style and route, this may fluctuate. Remove the wheels in question and check the wear indicator on them. If they are expired, they must be replaced quickly as they will promptly affect your discs and keep doing this scrap or grinding noise on Mitsubishi Asx. If after looking at this point, you’re still encountering a grinding noise on your Mitsubishi Asx, have a look at this article to find a solution.
I feel a frequent noise that stops when I brake from my Mitsubishi Asx brake calipers
If you are the victim of a continuous noise in the brake calipers of your Mitsubishi Asx that only stops when you press your brake system, it is quite conceivable that caliper wear is the reason. Indeed, they can jam over time, especially if they are not employed enough. In such a case, they will tend to stay on in the closed situation, so they will constantly stick the pads against the discs, which will lead to an increase in consumption and precipitate deterioration of your pads. To confirm it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Mitsubishi Asx
If in your case, you feel a vibration when braking that would have come from the brake calipers of your Mitsubishi Asx, you will have to worry about the condition of your discs. Discs tend to wear over time and although they have a much longer life than pads, they must be substituted at some point. A vibration most often informs of veiled brake disc, you can check it by disassembling your wheels. If so, change them or have them replaced by your mechanic.
When I brake, I feel a squealing in my brake calipers of my Mitsubishi Asx
Finally, if you have a noise close to a squeak when you use your brakes, it is possible that brake pad dust has settled in the brake calipers of your Mitsubishi Asx, creating a squeak when the system is pressurized. You will have to take it out your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
