It happens in some cases that your automobile makes noises in the brake calipers, you are almost never reassured by this types of noise and you automatically tend to think that you will have an incident or that the fix will cost you an substantial amount of money. So, what if you discern noise from the brake calipers on your Mercury Mariner? It may not be some thing serious and you may be able to repair it yourself, but when in uncertainty, since your safety and the one of others is in question, it is better to examine before a more serious failure happens. It is with this in mind that we have made the decision to compose this article and give you the opportunity to locate the problem and find a solution. We will go through different steps, review all possible origins of caliper brake noise on Mercury Mariner, and give you the reasons for them in order to help you fix the problem.
The different types of brake caliper noise on Mercury Mariner and their causes
The function of the Mercury Mariner brake calipers is to come pinch the brake discs of your Mercury Mariner thanks to the pads they will activate. This element is an important element of your vehicle’s safety. Hearing a noise from it must therefore be looked into immediately and leaving it lying around is not a good answer.
I hear a grinding noise on my brake calipers on Mercury Mariner
If you perceive a grinding or scrap metal noise coming from the brake calipers of your Mercury Mariner, it is highly conceivable that it will be caused by brake pads at the end of their existence, in fact, the purpose of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average runtime in kilometres for pads, but according to your driving style and route, this may differ. Remove the wheels in question and check the wear indicator on them. If they are expired, they must be replaced quickly as they will very easily damage your discs and keep doing this scrap or grinding noise on Mercury Mariner. If after looking at this point, you’re still encountering a grinding noise on your Mercury Mariner, have a look at this article to find a solution.
I encounter a continuing noise that stops when I brake from my Mercury Mariner brake calipers
If you are the victim of a regular noise in the brake calipers of your Mercury Mariner that only stops when you press your brake system, it is quite conceivable that caliper wear is the reason. In fact, they can jam over time, especially if they are not employed enough. In such a case, they will tend to stay in the closed situation, so they will constantly stick the pads against the discs, which will lead to an rise in consumption and precipitate deterioration of your pads. To confirm it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Mercury Mariner
If in your case, you encounter a vibration when braking that would have come from the brake calipers of your Mercury Mariner, you will have to get worried about the state of your discs. Discs tend to wear over time and although they have a longer life than pads, they must be substituted at some point. A vibration most often informs of veiled brake disc, you can check it by disassembling your wheels. If so, swap them or have them replaced by your technician.
When I brake, I encounter a squealing in my brake calipers of my Mercury Mariner
Finally, if you have a noise close to a squeak when you use your brakes, it is plausible that brake pad dust has settled in the brake calipers of your Mercury Mariner, causing a squeak when the system is pressurized. You will have to take it out your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
