It occurs sometimes that your automobile makes noises in the brake calipers, you are rarely reassured by this types of noise and you instantly tend to think that you will have an incident or that the fix will cost you an astronomical amount. So, what if you identify noise from the brake calipers on your Mercedes Classe C? It may not be anything major and you may be able to repair it yourself, but when in doubt, since your safety and the one of others is in question, it is better to check before a more serious failure happens. It is with this in mind that we have made the decision to compose this content and give you the opportunity to find out the problem and find a solution. We will go through different steps, review all possible origins of caliper brake noise on Mercedes Classe C, and give you the causes for them in order to help you resolve the problem.
The different types of brake caliper noise on Mercedes Classe C and their causes
The function of the Mercedes Classe C brake calipers is to come pinch the brake discs of your Mercedes Classe C thanks to the pads they will activate. This component is an essential element of your vehicle’s safety. Hearing a sound from it must therefore be examined quickly and leaving it lying around is not a good alternative.
I hear a grinding noise on my brake calipers on Mercedes Classe C
If you perceive a grinding or scrap metal noise coming from the brake calipers of your Mercedes Classe C, it is highly imaginable that it will be linked to brake pads at the end of their life, actually, the purpose of the pads is to act as a buffer during braking and they will therefore naturally wear out over time. Each manufacturer gives an average runtime in kilometres for pads, but based on your driving style and route, this may vary. Remove the wheels in question and check the wear indicator on them. If they are out of date, they must be swapped quickly as they will promptly affect your discs and keep doing this scrap or grinding noise on Mercedes Classe C. If after checking this point, you’re still going through a grinding noise on your Mercedes Classe C, have a look at this article to find a solution.
I feel a uninterrupted noise that stops when I brake from my Mercedes Classe C brake calipers
If you are the victim of a continuous noise in the brake calipers of your Mercedes Classe C that only stops when you press your brake system, it is quite possible that caliper wear is the reason. Indeed, they can jam as time passes, specifically if they are not used enough. In this case, they will tend to remain in the closed position, so they will always stick the pads against the discs, which will lead to an increase in consumption and precipitate deterioration of your pads. To verify it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Mercedes Classe C
If in your case, you feel a vibration when braking that would have come from the brake calipers of your Mercedes Classe C, you will have to be concerned about the condition of your discs. Discs tend to wear over time and although they have a much longer runtime than pads, they must be substituted at some point. A vibration most often informs of veiled brake disc, you can check it by removing your wheels. If so, swap them or have them replaced by your mechanic.
When I brake, I feel a squealing in my brake calipers of my Mercedes Classe C
Finally, if you have a noise close to a squeak when you use your brakes, it is possible that brake pad dust has settled in the brake calipers of your Mercedes Classe C, causing a squeak when the system is pressurized. You will have to remove your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
