It occurs in some cases that your automobile makes noises in the brake calipers, you are certainly not reassured by this types of noise and you automatically tend to think that you will have an accident or that the repair will cost you an astronomical amount. So, what if you identify noise from the brake calipers on your Mercedes Actros? It may not be some thing severe and you may be able to solve it yourself, but when in doubt, since your safety and the one of others is in question, it is better to verify before a more serious failure occurs. It is with this in mind that we have made the decision to create this article and give you the opportunity to find out the problem and find a solution. We will go through different steps, review all possible sources of caliper brake noise on Mercedes Actros, and give you the reasons for them in order to help you resolve the trouble.
The different types of brake caliper noise on Mercedes Actros and their causes
The objective of the Mercedes Actros brake calipers is to come pinch the brake discs of your Mercedes Actros thanks to the pads they will activate. This element is an essential element of your vehicle’s safety. Experiencing a noise from it must therefore be investigated promptly and leaving it lying around is not a good solution.
I hear a grinding noise on my brake calipers on Mercedes Actros
If you listen to a grinding or scrap metal noise coming from the brake calipers of your Mercedes Actros, it is highly conceivable that it will be caused by brake pads at the end of their existence, indeed, the function of the pads is to act as a buffer during braking and they will therefore logically wear out over time. Each producer gives an average runtime in kilometres for pads, but depending on your driving style and route, this may differ. Remove the wheels in question and check the wear indicator on them. If they are dead, they must be swapped quickly as they will very easily damage your discs and keep doing this scrap or grinding noise on Mercedes Actros. If after checking this point, you’re still encountering a grinding noise on your Mercedes Actros, have a look at this article to find a solution.
I encounter a regular noise that stops when I brake from my Mercedes Actros brake calipers
If you are the victim of a regular noise in the brake calipers of your Mercedes Actros that only stops when you press your brake system, it is quite plausible that caliper wear is the reason. In fact, they can jam after some time, specifically if they are not used enough. In this case, they will tend to stay on in the closed position, so they will constantly stick the pads against the discs, which will lead to an rise in consumption and premature deterioration of your pads. To confirm it, try to brake several times frankly to try to unblock them. If this does not work, it will be necessary to consider replacing them.
When I brake, my brake pedal vibrates on my Mercedes Actros
If in your case, you encounter a vibration when braking that would have come from the brake calipers of your Mercedes Actros, you will have to be concerned about the state of your discs. Discs tend to wear over time and although they have a longer runtime than pads, they must be substituted at some point. A vibration most often shows of veiled brake disc, you can check it by disassembling your wheels. If so, change them or have them replaced by your auto technician.
When I brake, I encounter a squealing in my brake calipers of my Mercedes Actros
Finally, if you have a noise close to a squeak when you use your brakes, it is plausible that brake pad dust has settled in the brake calipers of your Mercedes Actros, producing a squeak when the system is pressurized. You will have to remove your wheels and clean the calipers with a snowblower and a brush (metal or rigid).
